The drip tray is full of water.
Empty the drip tray.
Support for yourCoffee
Insert drip tray or Empty drip tray
Fit the drip tray or Empty the drip tray appears on the coffee machine display.
The drip tray is not positioned correctly in the coffee machine.
Pull the drip tray out of the coffee machine.
Push the drip tray back into the coffee machine until it clicks into place.
The drip tray contacts (metal discs) are soiled.
The contacts (metal discs) will not be able to detect that the drip tray is full or has been fitted if they are damp or dirty. Check the contacts and the area around them once a week.
The contacts (metal discs) are located at the back of the drip tray.
CVA 7xxx:
CVA 6xxx:
Clean the contacts under warm running water, using a drop of washing-up liquid.
Also clean the gap between the contacts thoroughly.
Turn the drip tray over.
Clean the contacts thoroughly from underneath as well.
Dry the contacts and the gap between the contacts well.
Dry the drip tray.
Insert the drip tray back into the coffee machine. Push the drip tray into the coffee machine until it clicks into place.
There is a technical fault.
Switch the coffee machine off and on again at the mains switch.
If the fault persists, please contact us or book a repair appointment online.
Additional media
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
