The grease filter must be cleaned.
Clean the grease filter and cover grille as follows:
Risk of damage to the cover grille.
Pull the cover grille vertically out of the top of the KMDA.
Take hold of the cover grille in the centre of the bars.
Pull the cover grille vertically upwards.
Carefully remove the grease filter using the recessed grips (1). Ensure that you do not tilt the grease filter.
Pour out any liquid which has collected at the bottom of the grease filter.
Cleaning the grease filter and cover grille by hand:
Clean the cover grille and the grease filter with a soft nylon brush in a mild solution of hot water and a little washing-up liquid. Do not use concentrated washing-up liquid.
Cleaning the grease filter and cover grille in the dishwasher:
Place the cover grille upright in the lower basket.
Place the grease filter with its base facing upwards in the lower basket. Ensure the spray arm is not obstructed.
Use a standard household dishwasher detergent.
Select a dishwasher programme with a maximum wash temperature of:
55 °C for the cover grille
65 °C for the grease filter
Depending on the detergent used, cleaning the grease filter in a dishwasher can cause permanent discolouration to the internal surfaces of the filter. However, this will not affect the functioning of the grease filter in any way.
Replace the grease filter and refit the cover grille.
Reset the operating hours counter by pressing the sensor control for 3 seconds.
