Emptying the dust container (Triflex)

Activate the ComfortClean function (if available)

• Always run the interim cleaning function for the fine dust filter before emptying the dust container. You should also run it whenever the suction power begins to drop.
  This enables the vacuum cleaner to achieve the very best cleaning performance again straight away.

• 

• The fine dust filter is located in the lid of the dust container. Twist it anti-clockwise by 3 180° turns. Use the recesses to help you.

• You will hear an operating noise, which is a normal part of how the ComfortClean function works.

Emptying the dust container

• Empty the dust container at the latest when the dust has reached the MAX marking on the dust container.

• 

• Turn the lid of the dust container in the direction of the arrow as far as the first stop.

• 

• Lift the dust container upwards to remove it. The contents of the container can be disposed of with normal household waste, providing they consist of general household dust only.

• Hold the dust container close to the bin to prevent dust from billowing out.

• 

• Turn the lid of the dust container in the direction of the arrow as far as the next stop.

• 

• The cover at the bottom of the dust container will open and the dust will fall out.

• Turn the lid of the dust container back to its original position.

• Close the flap, making sure it clicks into place.

• 

• Slide the dust container handle along the guide line and down on to the PowerUnit connector from above until it audibly clicks into place.