The cookware was filled with too little or too much water.
Fill the cookware with water according to the MIN/MAX markings on the inside of the pot. Make sure that the water does not exceed the mark once the food has been added.
Support for
Hob
Boiling process with M Sense not right
You are not satisfied with the boiling process in the M Sense pot.
Placing a lid incorrectly on an item of cookware disrupted a sensor.
Place the cookware lid flush on the top of the item of cookware.
Another programme is more suitable for preparing the food.
Change the programme. Examples for selecting a programme can be found in the programme table, see “Programmes – Food and cookware programmes”. Make sure that there is no food other than water in the cookware during a heating-up phase.
Try out other programmes until you are satisfied with the result.
Food was added to the cookware before the Booster programme reached the end of its heating-up phase.
Wait until the end of the heating-up phase of the Booster programme before adding food to the pot.
The cookware was not positioned in the right place.
The optimum cookware positions can be found in the operating and installation instructions for your hob.
The setting for the altitude on the hob does not match the installation site.
Find out the altitude of the installation site.
Adjust the altitude of the installation site on the hob (see the “Adjusting settings” section of the operating and installation instructions for your hob).
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
