The residual water drawer has not been detected.
Switch the steam ironing system off and on again.
Drain fault appears in the steam ironing system display.
Switch the steam ironing system off and on again.
Switch the steam ironing system off.
Clean and dry the metal contacts in the residual water drawer.
Switch the steam ironing system back on and follow the instructions shown in the display.
Remove the residual water drawer and fill it with fresh water.
Put the residual water drawer back in the tower.
Remove the residual water drawer again if you are prompted to do so by the appropriate message in the display.
Empty the residual water drawer and dry the metal contacts.
Put the residual water drawer back in the tower.
The steam ironing system is now ready for operation and will continue to operate from the point reached before the fault was registered.
No remedy possible.
If the fault persists, please contact us or book a repair appointment online.