The stopcock is closed.
Open the stopcock fully.
Support for yourDishwashing
Water inlet fault/Please open the stopcock
The dishwasher display shows fault message Water inlet fault/Please open the stopcock.
The water inlet filter is soiled.
Please clean the water inlet filter (2) in accordance with the operating instructions.
The water inlet hose is kinked.
Remove any kinks or loops from the water inlet hose. Keep an eye on these points for a while afterwards, as the plastic may weaken and the material may tear. In the event of any damage, the water inlet hose must be replaced.
The flow pressure at the water connection is lower than 30 kPa (0.3 bar).
Contact the facility manager or a plumber.
If the fault persists, please contact us or book a repair appointment online.
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
