The Wash, Dry and End programme sequence displays on the dishwasher are flashing simultaneously.
In longer breaks between wash/rinse cycles (lasting weeks or months at a time), or when using for the first time, the pump may become dry and stick together.
Remove the filter combination from the wash cabinet.
Pour 1 litre of warm water (max. 75 °C) (caution: risk of scalding!) with 3 to 5 drops of rinse aid into the dishwasher interior and let it soak for 5 minutes.
Then start the programme again.
Repeat this step 2 to 3 times.
Switch the dishwasher off.
Switch the dishwasher back on after a few seconds.
Use the programme selector to select the programme you want.
Press the Start/Stop button.
If the fault persists, please contact us or book a repair appointment online.
For thorough and gentle cleaning of glasses, crockery and cutlery, we recommend Miele products which also care for your dishwasher at the same time.
