Excess quantity of detergent or rinse aid dispensed.
A sensor has detected too much foam inside the appliance. The wash programme has been interrupted.
To remove the fault message, set the programme selector to Stop/End or, if you are using light-touch switches, press and hold Start/Stop for around 5 seconds.
Switch your appliance off and then back on again.
If you are using detergent tabs that already contain rinse aid, select the “Combi tab” function (if available).
Do not use detergent tabs with the “Quick wash 40 °C” programme.
If the fault persists, please contact us or book a repair appointment online.
For thorough and gentle cleaning of glasses, crockery and cutlery, we recommend Miele products which also care for your dishwasher at the same time.
