The brew unit cannot be positioned correctly.
Check whether you can remove the brew unit.
If you can remove the brew unit, proceed as follows:
Clean the brew unit under running water without using cleaning agents.
Push the coffee ejector of the brew unit into the correct position.
CVA only: Insert just the waste container and water container.
Close the appliance door.
Switch the coffee machine on with the On/Off button.
The brew unit drive will be initialised. The message Insert brew unit is displayed.
Open the appliance door.
Slide the brew unit back into the coffee machine.
If you cannot remove the brew unit, proceed as follows:
Switch the coffee machine off with the On/Off button.
Wait approx. 2 minutes.
Switch the coffee machine on again.
If the fault persists, please contact us or book a repair appointment online.
