PG 8581 [AD LD] - Thermal disinfector
 

PG 8581 [AD LD]
Thermal disinfector
with AD water connection, liquid dispensing & EcoDry function.

  • Perf./cycle, e.g. 44 transmission instruments or 44suction devices

    Further stacking options

    Further instruments can be also be reprocessed in the upper or lower basket in each cycle.
  • Efficient use of resources - variable speed heater pump

    The heart of perfect results

    In the individual programmes the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
  • Safety through monitoring - wash pressure and spray arm monitoring

    For a reliable result

    Outstanding preparation results are achieved because the jet pressure and spray arms are monitored continuously and a decline in jet pressure or load blockage is detected immediately
  • Convenient drying support - EcoDry

    Unique

    At the end of the reprocessing programme the machine door opens automatically as soon as the temperature in the wash cabinet has fallen below 70 °C, thanks to the AutoOpen function. This allows residual moisture to escape easily from the wash cabinet and the washed items to dry more quickly.
  • Total security - link to process documentation possible

    End-to-end documentation

    The optional addition of a module for process documentation is provided via a communication slot. The Ethernet module is used for documentation via software. The RS 232 module must be used for documentation within a USB solution or via a printer.
PG8581 [AD LD]

Optional Accessories - PG 8581 [AD LD]

E 336 Irrigation sleeves
E 336Irrigation sleeves

For the optimum loading of pipettes/MIS instruments in injector units.

E 476 Holder
E 476Holder

for micro instruments with a Ø of 4-8 mm.

XKM 3000 L Med Communication module
XKM 3000 L MedCommunication module

with Ethernet connection for integration in a network.

DOS K 85/1 Dispenser module for 5 litre canister
DOS K 85/1Dispenser module for 5 litre canister

With level indicator for the automatic dispensing of liquid cleaning agents.

SK Quick connection
SKQuick connection

For the simple and convenient changing of demineralisation cartridges.

APS 101 Sego Segosoft Miele Edition (additional licences)
APS 101 SegoSegosoft Miele Edition (additional licences)

For connection with a second or additional appliance.

ProCare Protein Check Protein check
ProCare Protein CheckProtein check

for proof of and qualitative assessment of possible protein residues.

ProCare Sure I-PM Starter Process indicator, starter kit
ProCare Sure I-PM StarterProcess indicator, starter kit

For visual routine monitoring during the cleaning and disinfection process.

ProCare Sure I-PM Process indicator, indicator strips
ProCare Sure I-PMProcess indicator, indicator strips

For visual routine monitoring during the cleaning and disinfection process.

ProCare Sure H-01 Plastic holder 
ProCare Sure H-01Plastic holder 

For holding ProCare Sure I-PM indicators.

E 807 Insert
E 807Insert

for optimum loading of 3 mesh or kidney trays.

E 363 Insert
E 363Insert

For the optimum loading of GYN and ENT instruments.

E 806/1 Insert
E 806/1Insert

for the optimum loading of 8 half-shell trays.

E 802/1 Insert
E 802/1Insert

for the optimum loading of different upright instruments.

E 801/1 Insert
E 801/1Insert

for the optimum loading of 8 mouthwash glasses.

A 151 Lower basket
A 151Lower basket

For holding standard DIN mesh trays as well as various inserts.

AUF 2 Holder
AUF 2Holder

for optimum reprocessing of transmission instruments in upper basket O 801/2.

AUF 1 Holder
AUF 1Holder

for optimum reprocessing of transmission instruments in upper basket O 177/1.

E 523 Insert
E 523Insert

for the optimum loading of 6 mesh trays.

E 522/1 Insert
E 522/1Insert

for the optimum loading of 9 impression trays.

E 521/2 Insert
E 521/2Insert

for the optimum loading of 7 extraction, orthodontic and/or technical forceps.

E 520 Insert
E 520Insert

for the optimum loading of root canal instruments.

DOS K 85 Dispenser module for 5-10 litre canisters
DOS K 85Dispenser module for 5-10 litre canisters

With level indicator for the automatic dispensing of liquid cleaning agents.

E 339/1 Insert
E 339/1Insert

for the optimum loading of up to 12 tray dividers and trays.

E 338 Insert
E 338Insert

for the optimum loading of up to 8 half-shell trays.

E 337/1 Insert
E 337/1Insert

for the optimum loading of upright instruments.

E 491 Insert
E 491Insert

for the optimum loading of rotating instruments.

UG 30-60/60-85 Closed plinth
UG 30-60/60-85Closed plinth

to raise the machine, 60 cm deep, 60 cm wide.

UG 30-90/60-85 Closed plinth
UG 30-90/60-85Closed plinth

to raise the machine incl. side unit, 60 cm deep, 90 cm wide.

E 378 Insert
E 378Insert

For holding different instruments.

UG 70-60/80 Plinth base with door 
UG 70-60/80Plinth base with door 

for the ergonomic loading and unloading of a dishwasher - height 70 cm.

APH 531 Adapter
APH 531Adapter

For connecting the Miele printer cable to the appliance.

A 800 Tubular filter
A 800Tubular filter

For the safe and economic reprocessing of hollow instruments.

E 130 Insert
E 130Insert

For the optimum of 10 trays.

A 804 Cleaning brush
A 804Cleaning brush

For the optimum cleaning of the tubular filter A 800.

E 379 Insert
E 379Insert

For holding different instruments.

APH 302 Connection cable type 2
APH 302Connection cable type 2

for connection of a machine with serial interface to a PC.

APS 102 Sego SegoAssign Plus
APS 102 SegoSegoAssign Plus

To connect the Segosoft with the in-house patient management system.

XKM RS 232 10 Med Communication module
XKM RS 232 10 MedCommunication module

with serial interface (RS232) for connection to a printer.

APH 530 Connection cable
APH 530Connection cable

For interruption-free connection to the printer.

E 197 Insert
E 197Insert

For optimum accommodation of different instruments.

UfZ Conversion kit for two cartridges
UfZConversion kit for two cartridges

For the quick change to a full/partial demineralisation cartridge.

APS 200 Sego Segosoft Miele Edition USB solution
APS 200 SegoSegosoft Miele Edition USB solution

for seamless and legally watertight documentation via USB stick.

E 131/1 Insert
E 131/1Insert

for optimum loading of 5 mesh and kidney trays.

E 445 Irrigation sleeve cover
E 445Irrigation sleeve cover

for the optimum securing of instruments in irrigation sleeves.

APH 301 Connection cable type 1
APH 301Connection cable type 1

for connection of a machine with serial interface to a PC.

APH 591 Paper roll
APH 591Paper roll

for protocol printer APH 500 PRT100 and APH 510 PRT110.

APH 590 Ink cartridge
APH 590Ink cartridge

for PRT 100 report printer.

E 430/1 Insert
E 430/1Insert

For optimum accommodation of different instruments.

A 803 Holder
A 803Holder

for the optimum loading of transmission instruments.

E 443 Irrigation sleeves
E 443Irrigation sleeves

for the optimum cleaning of MIS instruments.

APH 304 Extension cable
APH 304Extension cable

5 m, for the extension of connection cable type 1 and 2.

E 446 Irrigation sleeve cover
E 446Irrigation sleeve cover

for the optimum securing of instruments in irrigation sleeves.

APH 190 Wall bracket
APH 190Wall bracket

for Segosoft modules.

PG 8596 Dispensing cabinet
PG 8596Dispensing cabinet

For process chemicals and dispenser modules

APH 303 Extension cable
APH 303Extension cable

3 m, for the extension of connection cable type 1 and 2.

APH 406 Network cable
APH 406Network cable

for connection to the network, length 3 m (type 6).

E 143 Insert
E 143Insert

For optimum accommodation of different instruments.

VE P 2000 Full demineralisation cartridge
VE P 2000Full demineralisation cartridge

For optimum water preparation.

DE-CS6-85 Appliance lid
DE-CS6-85Appliance lid

Cover for top of machine incl. side unit, 60 cm deep, 90 cm wide.

APH 407 Network cable
APH 407Network cable

for connection to the network, length 5 m (type 7).

E 441/1 Insert
E 441/1Insert

for the optimum loading of Micro instruments.

E 316 Plastic barrel
E 316Plastic barrel

For refilling single use resins

ADS 3 Silicone adaptor
ADS 3Silicone adaptor

For holding transmission instruments when using AUF 1 or AUF 2.

VE P 2800 Full demineralisation cartridge
VE P 2800Full demineralisation cartridge

For optimum water preparation.

APH 305 Extension cable
APH 305Extension cable

10 m, for the extension of connection cable type 1 and 2.

APH 408 Crossover network cable
APH 408Crossover network cable

for direct connection to PC, length 3 m (type 8).

A 102 Upper basket
A 102Upper basket

Height adjustable, for the optimum loading of inserts.

E 142 Insert
E 142Insert

For holding different instruments.

ADS 2 Silicone adaptor
ADS 2Silicone adaptor

For holding transmission instruments when using AUF 1 or AUF 2.

E 147/1 Insert
E 147/1Insert

for the optimum loading of 10-12 mouthwash glasses.

LP 2800 Demineralisation cartridge, empty
LP 2800Demineralisation cartridge, empty

For the manual filling of single use resins.

E 442 Irrigation sleeves
E 442Irrigation sleeves

for the optimum cleaning of MIS instruments.

A 830/1 Insert
A 830/1Insert

ideal holder for separable mouth specula.

APH 409 Crossover network cable
APH 409Crossover network cable

for direct connection to PC, length 5 m (type 9).

ADS 1 Silicone adaptor
ADS 1Silicone adaptor

For holding transmission instruments when using AUF 1 or AUF 2.

UBS 3 Conversion kit
UBS 3Conversion kit

For use with selected series G 78 upper baskets in PG 85 machines.

A 801 Adapter
A 801Adapter

for use of AUF 1 and AUF 2 in connection with A 105/1.

A 317 Insert
A 317Insert

for the optimum loading of 6 mesh trays.

E 315 Full demineralisation single use resin
E 315Full demineralisation single use resin

For the regeneration of full demineralisation cartridges

E 198 Insert
E 198Insert

for optimum loading of up to 6 mesh and kidney trays.

APH 500 PRT 100 Report printer
APH 500 PRT 100Report printer

for printing process reports.

E 413 Insert
E 413Insert

for the optimum loading of extraction hoses.

A 814/1 Holder
A 814/1Holder

for optimum reprocessing of tips for Air Scaler and Piezo Scaler.

Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs