PLW 8615 [EL/S CT] - Lab washer, steam/electrically heated - single door with combi tank, 900 mm wide, 351 l usable capacity.--stainless steel exterior
  • - single door with combi tank, 900 mm wide, 351 l usable capacity.--stainless steel exterior
 

PLW 8615 [EL/S CT]
Lab washer, steam/electrically heated
- single door with combi tank, 900 mm wide, 351 l usable capacity.

  • Capacity/cycle, e.g.216 laboratory flasks, 588vials or 294pipettes
  • Flexible use of the combi tank as a recycling/pre-heating tank

    Combi tank

    Reduces cycle times and saves resources.
  • Flexible and simple – modular load carriers & EasyLoad system

    Versatile load carriers

    The versatile load carriers from Miele Professional offer a hugely diverse range of possibilities with regard to loading.
    The load carriers can be flexibly adapted to the wash items in just a few steps with a small number of load carriers in combination with some additional modules and inserts. This saves costs as well as space.

    EasyLoad

    The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy.
  • Efficient – strong pump power with the variable-speed pump

    The heart of perfect results

    The two-pump technology is at the heart of Miele's lab washers. The variable-speed pump is especially versatile when connecting the basket. The pump adapts the wash pressure and required water to the specific requirements – high pressure facilitates the removal of stubborn stains, while low pressure ensures complete wetting of the whole load. This guarantees minimum use of resources with outstanding wash results.
  • Reliable results – spray arm monitoring and conductivity meter

    Spray arm monitoring

    Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.

    Conductivity monitoring

    Reliably clean: Residue-free final rinse for perfect results.
PLW8615 [EL/S CT]

Product details - PLW 8615 [EL/S CT]

EAN: 4002516145042 / Article no. 62861504GB / Mat. no. 11175200
Construction type and version 
Construction type
1 glazed lift door

Vertical door opening

The lift-up sliding door opens and closes the wash cabinet using a vertical, electronically controlled movement. In this way, the work area in front of the washer-disinfector remains freely accessible for transport trolleys or loading and unloading conveyors, for example. The optional lift-up sliding door in easy-to-clean full glass also facilitates visual control of the load being processed.
Heating type
Steam/Electric convertible

Dual heating electricity/steam

Quick and flexible: these large-capacity washer-disinfectors have two heat sources for short cycle times (steam and electric heating). Alternatively, the machines can be heated using electricity only (if steam cannot be generated).
Front/back
Stainless Steel
Side panels
Stainless steel
Individual or row formation
Loading with loading carriages
Electrical door lock
Buzzer, acoustic signal at end of programme
Service-friendly design

Easy-to-service construction

Short service times thanks to maintenance-optimised appliance design.
Application 
Suitable for laboratories

Perfect for laboratories

These laboratory washers meet the requirements of a laboratory particularly well. Thanks to their powerful wash technology and variety of programmes including flexible loading variations to accommodate all kinds of laboratory glassware, they facilitate fast and analytically pure reprocessing.
Suitable for industrial use

Perfect for industry

These washer-disinfectors meet the requirements of industry particularly well. With several wash procedures as well as special programmes for all kinds of materials and impurities, they facilitate the thorough reprocessing of industrial tools –
such as electronics, circuit boards, glass, metal and plastic components.
Capacity 
Narrow-necked glassware per cycle [number]
216
Test tubes per cycle [number]
588
Laboratory flasks per cycle [number]
216
Pipettes per cycle [number]
294
Performance data 
Circulation pump, Qmax in l/min.
400
Additional circulation pump for load carriers – direct coupling, Qmax in l/min.
600
Variable-speed pump

The heart of perfect results

The two-pump technology is at the heart of Miele's lab washers. The variable-speed pump is especially versatile when connecting the basket. The pump adapts the wash pressure and required water to the specific requirements – high pressure facilitates the removal of stubborn stains, while low pressure ensures complete wetting of the whole load. This guarantees minimum use of resources with outstanding wash results.
Wash cabinet usable capacity in l
351
Tested operating hours

Note

Our machines undergo intensive testing under laboratory conditions. The actual operating hours may vary depending on actual usage behaviour, maintenance and care of the machine.
15.000
Tested service life in wash cycles

Note

Our machines undergo intensive testing under laboratory conditions. The actual wash cycles may vary depending on actual usage behaviour, maintenance, and care of the machine.
20.000
Controls 
Programme selection
Full-touch colour display

Maximum user convenience

Nice and easy: the latest touch controls make the appliance easy and intuitive to use.
Programmability
programmable

Programmable controls

According to requirements: programmable controls enable perfect adaptation to suit individual needs.
Programmes [number]
30
Free programme positions [number]
170
Programme recontinuation in event of power outage

Programme failure protection

Time-saving and safe: The programme failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message.
Time left display
Programme sequence indicator
Status display via chamber lighting

Status display via chamber lighting

Convenient: changing chamber lighting colours indicate the programme phase status.
Selectable display languages

Adjustable display language

No misunderstandings: The user can select his/her language of choice from a number of different options. All display notifications appear in this language, so that the highest level of operating safety is ensured.
Standard electrical connection 
Electrical connection
3N AC 400V 50HZ
Heater rating in kW
18.00
Total connected load in kW
20.00
Fuse rating in A
32-35
Possible voltage variant 1

Note

If the appliance can be converted to a different voltage option, additional possible values for electrical connection can be found here. The Miele service department can do this conversion for you for a fee.
 
Total connected load in kW
10.00
Fuse rating in A
20
Water connection/drainage 
Cold water [number]
2
Hot water [number]

Efficient hot water connection

Connection to the warm water supply saves a lot of time and energy.
1
DI water [number]

DI water connection

Thanks to the connection for fully demineralised water (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Carrying out the final rinse with DI water also protects valuable wash items from deposits and corrosion.
2
Required flow pressure in kPa
200-1.000
Maximum water hardness (cold water/hot water) in mmol/l
0.710
Dump valve [DN]
50
Drain pump (optional)
Compressed air connection 
Compressed air connection, technical [number]
1
Required compressed air, technical, in kPa
600-800
Drying unit

Info

The drying unit is available as an optional extra for
- G 7823
- G 7824
- G 7825
- G 7826
- PG 8527
- PG 8528
- PLW 8615
- PLW 8616
- PLW 8617
.
 
Heating mode drying unit
Electricity

Drying unit

Reliable reprocessing results achieved more quickly with hot air drying.
Air throughput in m³/h
250
Temperature settings in 1 °C steps
60-115
Time setting in 1 minute steps
1-240
HEPA filter class
H13

HEPA filters

Protection against contamination thanks to particle-free drying air.
Filtration efficiency HEPA filter (DIN EN 1822) in %
99,950
HEPA filter service life in h
1.000
Electric heater rating in kW
8,0
Dimensions and weight 
External dimensions incl. plinth/floor tray and top casing, height in mm
2.495
External dimensions, gross height in mm

Note 

Including packaging 
2,070
External dimensions, gross width in mm

Note 

Including packaging 
1,200
External dimensions, gross depth in mm

Note 

Including packaging 
800
Wash cabinet, width in mm
650
Wash cabinet, height in mm
675
Wash cabinet, depth in mm
800
In-feed height above floor in mm
850
Net weight in kg
411
Gross weight in kg

Note 

Including packaging 
436
Maximum floor loading in N

Maximum floor bearing capacity

Maximum floor bearing capacity states the maximum weight (N) that can be placed on the supporting surface on which the machine is installed. This maximum load bearing capacity is the result of adding up the weight of the machine, the load and the water in it, as well as the dynamic forces that occur during operation.
8000
Programmes 
Thermal disinfection

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Laboratory glassware

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Plastics

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Oil soiling

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Industrial parts cleaning

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Features 
2 integrated diaphragm dispenser pumps for liquid media

Integrated dispenser pump

Integrated dispenser pumps facilitate the quick and precise dosing of liquid media.
Additional integrated dispenser pumps
4
Combi tank

Combi tank

Reduces cycle times and saves resources.
Steam condenser (optional)

Steam condenser

Effective moisture removal from exhaust air.
Volumetric dispensing control
Conductivity monitoring

Conductivity monitoring

Reliably clean: Residue-free final rinse for perfect results.
Spray arm monitoring

Spray arm monitoring

Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.
Interface for cycle documentation

Process documentation

Safety through the clear documentation of all the reprocessing steps.
Multi-component filter system
Micro-fine filter

Micro fine filter

Reliable cleanliness: the large surface fine filter with a mesh of 0.2 mm can be relied upon to remove even the smallest particles from the wash water. For reliable reprocessing results and gentle care of the hydraulic components in the wash water circuit.
Load carriers – direct connection

Load carriers - direct connection

The direct connection guarantees the precise feed-in of water and drying air (in appliances with hot air drying) and the economical use of resources.
Integrated hot air drying (optional)

Integrated hot-air drying

All reprocessing items are dried efficiently using hot air filtered with a HEPA filter.
Integrated printer for cycle documentation (optional)

Integrated printer

For paper-supported documentation, the integrated printer produces a comprehensive report on the process.
Heater elements outside wash cabinet

Heater elements outside the wash cabinet

A plus for hygiene: The heating elements are installed outside the wash cabinet.
EasyLoad

EasyLoad

The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy.
Setting options for process chemicals (4 x 5 l or 2 x 5 l + 1 x 10 l)

Setting options for media canisters

Neat and tidy: The storage unit for liquid media.
Wash cabinet made from high-quality stainless steel (1.4404/316L)

Wash cabinet grade 316L 

The wash cabinet is made of high-quality stainless steel 1.4404 (AISI 316L).
Modular basket design

Modular load carriers

Load carriers can be flexibly adapted to the load depending on need or application.
Plinth, on wheels (optional)

Mobile plinth

To make it easy to service, the appliance can be installed on a mobile plinth.
Drain water cooling (optional)

Drain water cooling 

Drain water cooling can be integrated in the machine to cool the drain water and protect the pipe network. Diluting the water with cold water enables the temperature of the drain water to be reduced to a preset value.
Multi-coloured chamber lighting

Status display via chamber lighting

Convenient: changing chamber lighting colours indicate the programme phase status.
Connection options 
Ethernet interface

Ethernet interface

The Ethernet interface enables cable-supported communication in the local network.
External dispenser modules
USB interface

USB interface

Easy access to Miele Service: firmware updates can be performed via USB stick in order to save time.
Central dispensing

Central dispensing

For users with a high throughput the machines can be simply connected to a central dispensing system.
Peak load cut-out/energy management
Norms, test certificates and symbols 
CE
VDE (electrical safety)
EN 61010-2-040
Machinery Directive 2006/42/EC
Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs