PG 8583 [WW ADP LD] - Laboratory dishwasher
 

PG 8583 [WW ADP LD]
Laboratory dishwasher
with feed pump for AD water, liquid dispensing & EcoDry function.

  • Perf./cycle, e.g. 128 laboratory flasks

    Further stacking options

    Alternatively, 98 pipettes can be reprocessed per cycle with further laboratory glassware.
  • Efficient use of resources - variable speed heater pump

    The heart of perfect results

    In the individual programmes the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
  • Safety through monitoring - wash pressure and spray arm monitoring

    For a reliable result

    Outstanding preparation results are achieved because the jet pressure and spray arms are monitored continuously and a decline in jet pressure or load blockage is detected immediately
  • Convenient drying support - EcoDry

    Unique

    At the end of the reprocessing programme the machine door opens automatically as soon as the temperature in the wash cabinet has fallen below 70 °C, thanks to the AutoOpen function. This allows residual moisture to escape easily from the wash cabinet and the washed items to dry more quickly.
  • Total security - link to process documentation possible

    End-to-end documentation

    The optional addition of a module for process documentation is provided via a communication slot. The Ethernet module is used for documentation via software. The RS 232 module must be used for documentation within a USB solution or via a printer.
PG8583 [WW ADP LD]

Product details - PG 8583 [WW ADP LD]

EAN: 4002515565292 / Article no. 62858326GB / Mat. no. 10096810
Construction type and version 
Construction type
Freestanding, can be built-under, slim
Outer casing
Stainless steel
Can be built-under

Can be built under a worktop

The machine can be easily integrated under a worktop.
AutoClose – Automatic door lock

AutoClose*

A light touch is all it takes: With AutoClose, the door closes by itself.
Patent: EP 1 733 675 B1
Buzzer, acoustic signal at end of programme
Service-friendly design

Easy-to-service construction

Short service times thanks to maintenance-optimised appliance design.
Application 
Suitable for laboratories

Perfect for laboratories

These laboratory washers meet the requirements of a laboratory particularly well. Thanks to their powerful wash technology and variety of programmes including flexible loading variations to accommodate all kinds of laboratory glassware, they facilitate fast and analytically pure reprocessing.
Capacity 
Laboratory flasks per cycle [number]
128
Pipettes per cycle [number]
98
Performance data 
Circulation pump Qmax in l/min.
500
Maximum final rinse temperature in °C
93
Wash cabinet usable capacity in l
145.00
Tested operating hours

Note

Our machines undergo intensive testing under laboratory conditions. The actual operating hours may vary depending on actual usage behaviour, maintenance and care of the machine.
15,000
Controls 
Control system
TouchControl
Programme selection
Touch on metal
Short-cut buttons

Short cut buttons

Quick and convenient access to frequently used programmes.
Max. delay start in h
24
Programmability
programmable
Programmes [number]
14
Free programme positions [number]
2
A0 value controls

Intelligent A0-value controls

As soon as the prescribed A0 value is reached, the disinfection phase comes to an end and the programme continues in the next phase. Due to this system the cycle time is reduced, in comparison to a time-controlled programme.
Programme recontinuation in event of power outage

Programme failure protection

Time-saving and safe: The programme failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message.
Time left display
Programme sequence indicator
Selectable display languages

Adjustable display language

No misunderstandings: The user can select his/her language of choice from a number of different options. All display notifications appear in this language, so that the highest level of operating safety is ensured.
Standard electrical connection 
Electrical connection
AC 230V 50HZ
Heater rating in kW
5.5
Total connected load in kW
6.3
Fuse rating in A
30-32
Length of mains cable in m

Note

The length refers to the supply lead on the outside of the appliance.
1.90
Possible voltage variant 1

Note

If the appliance can be converted to a different voltage option, additional possible values for electrical connection can be found here. The Miele service department can do this conversion for you for a fee.
 
Electrical connection
3N AC 400V 50HZ
Total connected load in kW
9.30
Fuse rating in A
15-16
Possible voltage variant 2

Note

If the appliance can be converted to a different voltage option, additional possible values for electrical connection can be found here. The Miele service department can do this conversion for you for a fee.
 
Electrical connection
AC 230V 50HZ
Total connected load in kW
3.30
Fuse rating in A
15-16
Water connection/drainage 
Cold water [number]
1
Cold water for steam condenser [number]
1
Hot water [number]

Efficient hot water connection

Connection to the warm water supply saves a lot of time and energy.
1
ADP – with feed pump for DI water [number]

Feed pump for DI water

These appliances are supplied ex works with a connection for fully demineralised water (DI water), featuring an additional feed pump. This means that they can also be easily connected to on-site DI water systems even if they only have a low operating pressure.
1
Required flow pressure in kPa

Note on ADP variants

This value applies to cold, hot and DI water; however, it does not apply to DI water intake on ADP variants because these use a feed pump.
200-1.000
Maximum delivery head for drain pump in cm
100
Integrated water softener

Integrated water softener

The integrated water softener ensures optimum cleaning effectiveness.
Maximum water hardness (cold water/hot water) in mmol/l
10.700
Drain pump [DN]
22
Water protection system
Waterproof system
Dimensions and weight 
External dimensions, height in mm
835
External dimensions, width in mm
600
External dimensions, depth in mm
600
Wash cabinet, usable height in mm
520
Wash cabinet, usable width in mm
530
Wash cabinet, depth of lower basket in mm
520
Wash cabinet, depth of upper basket in mm
474
Net weight in kg
74
Emissions data 
Emissions – sound pressure at workplace

Emissions - sound pressure at workplace

The emission sound pressure level depends on the programme and is a value given to the noise created by the machine. Miele Professional appliances have very low noise levels.
<70 dB(A) re 20 µPa
Programmes 
Special 93 °C–10'
Standard
Universal
Intensive
Inorganic

Innovative cleaning programme

Optimum cleaning results and value retention thanks to innovative cleaning programmes for over 50 years.
Injector Plus
Organic

Innovative cleaning programme

Optimum cleaning results and value retention thanks to innovative cleaning programmes for over 50 years.
Pipettes
Plastics
Mini
Oil programme
Features 
1 dispenser pump for liquid cleaning agent

Integrated dispenser pump

Integrated dispenser pumps facilitate the quick and precise dosing of liquid media.
1 dispenser pump for neutralising agent

Integrated dispenser pump

Integrated dispenser pumps facilitate the quick and precise dosing of liquid media.
Volumetric dispensing control
Steam condenser
Spray pressure monitoring

Spray arm pressure monitoring

The wash pressure is monitored for perfect cleaning results.
Spray arm monitoring

Spray arm monitoring

Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.
Interface for cycle documentation (optional)

Process documentation

Safety through the clear documentation of all the reprocessing steps.
Multi-component filter system
Variable speed heater pump*Patent: EP 1 047 334 B2/*Patent: EP 1 247 993 B1

The heart of perfect results

In the individual programmes the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
Load carriers – direct connection

Load carriers - direct connection

The direct connection guarantees the precise feed-in of water and drying air (in appliances with hot air drying) and the economical use of resources.
EcoDry

EcoDry via patented AutoOpen function*

Quick drying: At the end of the reprocessing programme the appliance door opens automatically.
Patent: DE 102 007 008 950 B4
In-door salt container

Patented* in-door salt container

Ergonomic convenience: The in-door salt container is particularly easy to fill.
Patent: EP 1 457 153 B1
Customer service optical interface
Wash cabinet seamlessly welded using laser technology

Crevice-free wash cabinet

Perfect hygiene through optimised geometry and laser welding.
Heater elements outside wash cabinet

Heater elements outside the wash cabinet

A plus for hygiene: The heating elements are installed outside the wash cabinet.
Wash cabinet made from high-quality stainless steel (1.4301/304)

Wash cabinet made from high-quality stainless steel.

The wash cabinet is made of stainless steel quality 1.4301. The base of the wash cabinet and the inside door panel are qualitatively superior.
A wide range of accessories (optional)

Large selection of accessories

Comprehensive range of accessories for optimum cleaning performance and a variety of reprocessing options.
Connection options 
Serial interface RS 232 (optional)

RS 232 serial interface

The serial interface facilitates the exchange of data with other appliances, e.g. for process documentation.
WLAN via DataDiary (optional)

DataDiary

With DataDiary, Miele Professional is offering an intuitive, app-based method of process documentation. It is a Plug & Play solution to which you can simply connect and get started.
Data transmission is wireless between the Miele machine and a tablet PC and encrypted via WLAN (WPA2). The WLAN link is simple to install with an SSID (Service Set Identifier) and a password.

WLAN interface

The WLAN interface is ideally suited for wireless local and network-enabled communication. As well as transmitting process data for documentation purposes it also facilitates access to Miele's remote service.
Ethernet interface (optional)

Ethernet interface

The Ethernet interface enables cable-supported communication in the local network.
External dispenser modules
Norms, test certificates and symbols 
VDE (electrical safety)
IP safety class according to EN 60529: IP 21
EN 61010-2-040
EN 61010-1
RoHS guideline 2011/65/EU
Machinery Directive 2006/42/EC
Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs