PG 8504 [ADP] - Laboratory dishwasher with feed pump for AD water.--stainless steel exterior
  • with feed pump for AD water.--stainless steel exterior
 

PG 8504 [ADP]
Laboratory dishwasher with feed pump for AD water.

  • Perf./cycle, e.g. 64 narrow necked/lab glassware w/ injectors

    Further stacking options

    At the same time it is possible to reprocess other laboratory glassware in the upper basket.
  • Efficient use of resources - variable speed heater pump

    The heart of perfect results

    In the individual programmes the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
  • Dispense process chemicals easily: Powder dispenser in the door
  • Pump for DI water: final rinse with fully demineralised water
EAN: 4002515565285 / Article no. 62850422GB / Mat. no. 10096790
PG8504 [ADP]

Optional Accessories - PG 8504 [ADP]

E 136 Insert
E 136Insert

for optimum loading of 56 half petri dishes.

VE P 2000 Full demineralisation cartridge
VE P 2000Full demineralisation cartridge

For optimum water preparation.

A 103 Upper basket
A 103Upper basket

For the optimum loading of inserts.

E 351 Injector nozzle
E 351Injector nozzle

For the optimum cleaning of the wash items. Size 4 x 160 mm.

E 134 Insert
E 134Insert

for optimum loading of 210 slides.

A 848 Injector nozzle
A 848Injector nozzle

with support, for cleaning measuring cylinders.

UG 30-60/60-85 Box plinth
UG 30-60/60-85Box plinth

to raise the machine, 60 cm deep, 60 cm wide.

A 313 Module
A 313Module

For reprocessing large-volume laboratory glassware.

A 842 Injector nozzle
A 842Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 1 item 

A 844/1 Injector nozzle
A 844/1Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 5 items.

E 352 Injector nozzle
E 352Injector nozzle

For the optimum cleaning of the wash items.

E 118 Insert
E 118Insert

for the optimum loading of half petri dishes.

A 840/1 Injector nozzle
A 840/1Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 5 items.

A 150 Lower basket
A 150Lower basket

For the optimum loading of injector modules or inserts.

A 843/1 Injector nozzle
A 843/1Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 5 items

E 149 Insert
E 149Insert

for optimum loading of 80 test tubes, 16 x 105 mm.

A 845/3 Injector nozzle
A 845/3Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 20 items. 

E 144 Insert
E 144Insert

For the optimum loading of up to 18 beakers.

VE P 2800 Full demineralisation cartridge
VE P 2800Full demineralisation cartridge

For optimum water preparation.

E 403 Insert
E 403Insert

for optimum loading of up to 105 watch glasses.

ProCare Lab 30 C - 5 l Neutralising agent, acidic, 5 l
ProCare Lab 30 C - 5 lNeutralising agent, acidic, 5 l

For optimum neutralisation with citric acid based neutralising agent.

E 402 Insert
E 402Insert

for optimum loading of up to 44 watch glasses.

ProCare Lab 11 MA Powder cleaning agent, mildly alkaline, 10 kg
ProCare Lab 11 MAPowder cleaning agent, mildly alkaline, 10 kg

For optimum reprocessing of laboratory utensils.

A 841/2 Injector nozzle
A 841/2Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 10 items 

ProCare Lab 30 P - 5 l Neutralising agent, acidic, 5 l
ProCare Lab 30 P - 5 lNeutralising agent, acidic, 5 l

For optimum neutralisation with phosphoric acid based neutralising agent.

A 100 Upper basket
A 100Upper basket

For the optimum loading of injector modules or inserts.

A 840/3 Injector nozzle
A 840/3Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 20 items.

A 151 Lower basket
A 151Lower basket

For holding standard DIN mesh trays as well as various inserts.

E 139/1 Insert
E 139/1Insert

For the optimum loading of test tubes up to 12 x 200 mm.

E 319/4 Surface filter
E 319/4Surface filter

For optimum protection against contamination from labels or glass splinters.

A 5 Lid
A 5Lid

For optimum securing of delicate items.

DOS G 80 Flex Hose dispenser pump for 5-10 l containers
DOS G 80 FlexHose dispenser pump for 5-10 l containers

With level indicator for the automatic dispensing of liquid cleaning agents.

A 844 Injector nozzle
A 844Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 1 item.

A 101 Upper basket
A 101Upper basket

Height adjustable, for the optimum loading of inserts.

E 137 Insert
E 137Insert

for optimum loading of 56 half petri dishes.

A 846 Injector nozzle
A 846Injector nozzle

with support, for cleaning laboratory flasks and round flasks.

A 847 Injector nozzle
A 847Injector nozzle

with support, for cleaning Erlenmeyer flasks.

A 843/3 Injector nozzle
A 843/3Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 20 items

A 841 Injector nozzle
A 841Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 1 item

A 14/1 Lid
A 14/1Lid

for securing delicate load items.

A 102 Upper basket
A 102Upper basket

Height adjustable, for the optimum loading of inserts.

A 845/1 Injector nozzle
A 845/1Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 5 items.

AK 12/1 Insert
AK 12/1Insert

for loading different utensils.

UG 70-60/80 Plinth base with door 
UG 70-60/80Plinth base with door 

for the ergonomic loading and unloading of a dishwasher - height 70 cm.

A 302/3 Module
A 302/3Module

for optimum loading of laboratory glassware – can be equipped with 32 nozzles.

A 300/3 Module
A 300/3Module

for optimum loading of laboratory glassware – can be equipped with 8 nozzles. 

AK 12 Insert
AK 12Insert

for holding different utensils.

A 842/2 Injector nozzle
A 842/2Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 10 items

E 106 Insert
E 106Insert

For the optimum loading of wide neck flasks, measuring cylinders, etc.

E 362 Blind stopper
E 362Blind stopper

For the sealing of fittings to load carriers.

E 106/1 Insert
E 106/1Insert

For the optimum loading of wide neck flasks, measuring cylinders, etc.

A 845/2 Injector nozzle
A 845/2Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 10 items.

E 106/2 Insert
E 106/2Insert

For the optimum loading of wide neck flasks, measuring cylinders, etc.

DE-CS6-85 Appliance lid
DE-CS6-85Appliance lid

Cover for top of machine incl. side unit, 60 cm deep, 90 cm wide.

A 300/2 Module
A 300/2Module

for optimum loading of laboratory glassware – can be equipped with 8 nozzles.

E 109 Insert
E 109Insert

for the optimum loading of beakers up to 250 ml.

E 470 Injector nozzle
E 470Injector nozzle

for use in the mobile injector unit, Ø 2.5 x 90 mm.

PG 8596 Dispensing cabinet
PG 8596Dispensing cabinet

For process chemicals and dispenser modules

A 304 Module
A 304Module

For the optimum loading of up to 98 vials.

ProCare Lab 10 MA - 10 l Liquid detergent, mildly alkaline, 10 l
ProCare Lab 10 MA - 10 lLiquid detergent, mildly alkaline, 10 l

for optimum reprocessing of laboratory glassware and utensils.

E 103/1 Insert
E 103/1Insert

For the optimum loading of test tubes up to 12 x 75 mm.

A 860 Holder rack 
A 860Holder rack 

for injector modules A 300/2 and A 300/3

A 301/5 Module
A 301/5Module

for optimum loading of laboratory glassware – can be equipped with 18 nozzles.

A 302/2 Module
A 302/2Module

for optimum loading of laboratory glassware – can be equipped with 32 nozzles.

ProCare Lab 10 MA - 5 l Liquid detergent, mildly alkaline, 5 l
ProCare Lab 10 MA - 5 lLiquid detergent, mildly alkaline, 5 l

for optimum reprocessing of laboratory glassware and utensils.

A 861 Holder rack 
A 861Holder rack 

for injector modules A 301/4 and A 301/5

A 11/2 Insert
A 11/2Insert

For the gentle cleaning of delicate load items by interrupting the water jet.

A 838 Key set
A 838Key set

For adjusting basket heights and installing/removing injector nozzles.

A 843/2 Injector nozzle
A 843/2Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 10 items

E 104/1 Insert
E 104/1Insert

For the optimum loading of test tubes up to 12 x 105 mm.

A 845 Injector nozzle
A 845Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 1 item.

A 802 Jets
A 802Jets

for the optimum cleaning of the dispenser compartment.

A 301/4 Module
A 301/4Module

for optimum loading of laboratory glassware – can be equipped with 18 nozzles. 

E 105/1 Insert
E 105/1Insert

For the optimum loading of test tubes up to 12 x 165 mm.

A 862 Holder rack 
A 862Holder rack 

for injector modules A 302/2 and A 302/3

A 840 Injector nozzle
A 840Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 1 item. 

A 844/3 Injector nozzle
A 844/3Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 20 items.

ProCare Universal 61 Dishwasher salt, 3 x 2 kg
ProCare Universal 61Dishwasher salt, 3 x 2 kg

For optimum regeneration of the integrated softener.

A 842/3 Injector nozzle
A 842/3Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 20 items

A 841/1 Injector nozzle
A 841/1Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 5 items 

A 842/1 Injector nozzle
A 842/1Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 5 items 

A 3 Cover net
A 3Cover net

As cover for wash items in inserts.

DTD 2 Drip tray 
DTD 2Drip tray 

For the secure placement of media canisters. 

A 843 Injector nozzle
A 843Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 1 item

A 12/2 Insert
A 12/2Insert

For the gentle cleaning of delicate load items by interrupting the water jet.

A 844/2 Injector nozzle
A 844/2Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 10 items. 

A 306/1 Module
A 306/1Module

for the optimum loading of large-volume laboratory glassware. 

UG 30-90/60-85 Box plinth
UG 30-90/60-85Box plinth

to raise the machine incl. side unit, 60 cm deep, 90 cm wide.

E 353 Clamps
E 353Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

E 110 Insert
E 110Insert

for the optimum loading of beakers from 250 to 600 ml.

E 111 Insert
E 111Insert

For the optimum loading of beakers from 600 to 1,000 ml.

E 354 Clamps
E 354Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

ProCare Lab 10 AP - 5 l Liquid detergent, alkaline, 5 l
ProCare Lab 10 AP - 5 lLiquid detergent, alkaline, 5 l

For optimum reprocessing of laboratory utensils.

Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs