Compare
PLW 6111 [DP SC CL H14 CS SV USB]
Laboratory washer with 3 wash levels in SlimLine design with steam condenser, conductivity sensor and chamber lighting.
- Performance/cycle 126 narrow-necked glasses or 121 pipettes – 210 l usable capacityFurther loading options
Alternatively, 468 test tubes or 84 laboratory flasks can be reprocessed per cycle. - Ergonomic loading and unloading – telescopic runners
- Flexible – 4 different level positionsSmartLoad
Wash and dry with hot air on three separate wash levels, can be used flexibly in four positions. - Have everything in view thanks to the full-glass doorFull-glass door
In combination with the chamber lighting, the glass door allows a visual check of the current process. - High capacity – reprocessing of flasks up to 50 lLarge wash chamber
The spacious chamber provides room for large containers (up to 50 litres and 630 mm in height).
Product benefits
SlimLine design
Space-saving
The slim design, just 650 mm wide, fits in the smallest of spaces while ensuring a high capacity.
Full-glass door
Easy to service
In combination with the chamber lighting, the glass door allows a visual check of the current process.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Integrated hot-air drying
Dried safely
All reprocessing items are dried efficiently using hot air filtered with a HEPA filter.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
USB interface
Update quickly and safely
Easy access to Miele Service: firmware updates can be performed via USB stick in order to save time.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
SlimLine design
Space-saving
The slim design, just 650 mm wide, fits in the smallest of spaces while ensuring a high capacity.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Full-glass door
Easy to service
In combination with the chamber lighting, the glass door allows a visual check of the current process.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Clear text display
Text display
Everything at a glance: The display shows everything as clear text in the country-specific language.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Product details
PLW 6111 [DP SC CL H14 CS SV USB]
EAN 8051160656028 / Article number 62611126GB / Material number 10958750
EAN 8051160656028 / Article number 62611126GB / Material number 10958750
Construction type | Freestanding, 1 glazed hinged door Full-glass door In combination with the chamber lighting, the glass door allows a visual check of the current process. |
---|---|
Type of heating | Electricity |
Front/back | Stainless Steel |
Side panels | Stainless steel |
Slimline construction type | |
Number of wash levels | 3 |
Loading and unloading with telescopic runners | |
Electric door lock | |
Buzzer, acoustic signal at end of programme | |
Service-friendly design |
Narrow-necked glassware per cycle [number] | 126 |
---|---|
Test tubes per cycle [number] | 468 |
Laboratory flasks per cycle [number] | 84 |
Pipettes per cycle [number] | 121 |
Circulation pump, Qmax in l/min | 700 |
---|---|
Wash cabinet usable capacity in l | 210 |
Electrical connection | 3N AC 380-400V 50HZ |
---|---|
Heater rating in kW | 7.5 |
Total rated load in kW | 8.25 |
Fuse rating in A | 16 |
Length of mains connection cable in m | 2 |
Cold water [number] | 1 |
---|---|
Hot water [number] Efficient hot water connection Connection to the warm water supply saves a lot of time and energy. | 1 |
DI water [number] DI water connection Thanks to the connection for fully demineralised water (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Carrying out the final rinse with DI water also protects valuable wash items from deposits and corrosion. | 1 |
Required flow pressure in kPa | 100-800 |
Maximum water hardness (cold water/hot water) in mmol/l | 0.7 |
Drain pump [DN] | 22 |
Drying unit heating type | Electricity |
---|---|
Air throughput in m³/h | 150 |
Temperature setting in 1 °C increments | 0-160 |
Time setting in 1-minute increments | 0-120 |
HEPA filter class | H14 |
HEPA filter filtration efficiency (DIN EN 1822) in % | 99.995 |
HEPA filter service life in h | 1000 |
Electric heater rating in kW | 4 |
External dimensions, net height in mm | 1870 |
---|---|
External dimensions, net width in mm | 650 |
External dimensions, net depth in mm | 687 |
External dimensions, gross height in mm Note Including packaging | 2110 |
External dimensions, gross width in mm Note Including packaging | 945 |
External dimensions, gross depth in mm Note Including packaging | 840 |
Wash cabinet, height in mm | 665 |
Wash cabinet, width in mm | 540 |
Wash cabinet, depth in mm | 585 |
Rack height above floor in mm | 850 |
Net weight in kg | 251 |
Gross weight in kg Note Including packaging | 260 |
Maximum floor load in N/m² Maximum floor bearing capacity Maximum floor bearing capacity states the maximum weight (N) that can be placed on the supporting surface on which the machine is installed. This maximum load bearing capacity is the result of adding up the weight of the machine, the load and the water in it, as well as the dynamic forces that occur during operation. | 4000 |
Sound pressure LpA in cleaning and drying according to DIN EN ISO 11201 Emissions - sound pressure at workplace The emission sound pressure level depends on the programme and is a value given to the noise created by the machine. Miele Professional appliances have very low noise levels. | <lt/>70 dB(A) re 20 µPa |
---|---|
Heat dissipation into the room in MJ/h Heat output into the room During operation warm air is vented into the surrounding room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature. | 1.26 |
Thermal disinfection | |
---|---|
Laboratory glassware reprocessing | |
Plastics |
2 integrated hose dispenser pumps for liquid media | |
---|---|
Steam condenser | |
Volume flow control | |
Conductivity monitoring | |
Interface for process documentation | |
Multi-component filter system | |
Load carrier – direct coupling | |
Integrated hot air drying | |
Setting options for process chemicals (3 x 5 l) | |
Wash cabinet made from high-quality stainless steel (1.4404/316L) | |
Plinth | |
Chamber lighting |
CE | |
---|---|
EN 61010-2-040 | |
RoHS guideline 2011/65/EU | |
Machinery Directive 2006/42/EC |
Additional accessories and consumables
Find additional accessories and consumables to go with this product
Additional accessories for laboratory technology
Find here the accessories that can be bought additionally for this product.
Downloads
You can download these CAD data for free. You will receive a download link via e-mail.
3D data RFA
3D data RVT
3D data IFC
3D data FBX
3D data DWG