PLW 8636 [LAB MON] - Highlights

Integrated water softener

Clean results

Minerals in tap water can hinder the cleaning process and cause deposits to form on instruments and in the machine. Miele thermal disinfectors are fitted ex works with a water softener which removes the bulk of ions from tap water which cause water hardness. In the case of extremely hard water and in practices using large amounts of instruments, additional complete demineralisation may make sound economic sense.

Oil-resistant door seals

Seals for special requirements

The seals in the door and circulation circuit are resistant to the kinds of soiling that are typically found in laboratory and industrial technology: oil, grease, wax, plasticisers and residue from suds and acid. Silicone-free door seals are available as an option and can be installed as a retrofitting kit by Customer Service.

Crevice-free wash cabinet

Seamlessly welded

The wash cabinet developed by Miele Professional sets new hygiene standards. Crevice-free, it is welded using laser technology and its smooth joins stop dirt deposits from building up. This prevents the adhesion of blood and other soiling. An additional level of hygiene is achieved by installing the heater elements outside the wash cabinet.

Conductivity monitoring

Safety through controls

Residues from chemical agents during the final rinse phase can compromise the reprocessing result. Conductivity monitoring of the wash water facilitates the detection of such residues and their reduction to a defined level through further rinsing. This means that the reprocessing is more reliable, more resource-friendly and also reproducible.

Spray arm monitoring

Safety through controls

For optimum reprocessing results, the rotation speed of the spray arms must always lie in a prescribed interval. Through the contact-free monitoring of all machine and basket spray arms, problems such as the build-up of foam or an obstructing load item can be detected early on. As a result, spray arm monitoring contributes to the reliable reproduction of the validated reprocessing quality.

Spray arm pressure monitoring

Safety through controls

A variety of factors, such as a faulty basket connection or an excessive build-up of foam, can lead to a reduction in the wash pressure. Monitoring the wash pressure in the washer-disinfector guarantees optimum process operations, so that the appliance always produces reliable reprocessing results.

Programmable controls

Increased versatility

The programmable controls give Miele Professional washer-disinfectors, thermal disinfectors and lab washers a high level of flexibility. The appliances are already equipped with numerous programmes ex works. Authorised users can modify these programmes or upload their own.