PG 8528 - Washer-disinfector - two doors with usable capacity of 351 litres.--NO_COLOR
  • - two doors with usable capacity of 351 litres.--NO_COLOR
 

PG 8528
Washer-disinfector
- two doors with usable capacity of 351 litres.

  • Capacity/cycle, e.g. 18DIN mesh trays or232 narrow-necked glassware

    Further stacking options

    Alternatively, 2 MIS sets, 4 AN sets or 104 pipettes can be reprocessed per cycle, for example.
  • Optimum cleaning performance thanks to high-pressure wash system
  • Reliable dosage controls thanks to ultrasonic technology

    Ultrasonic dispenser control

    Reproducible reprocessing quality thanks to the precise dosing of all the media.
  • Economical thanks to steam condenser with heat recovery system

    Steam condenser with heat recovery system

    Efficient use of resources through heat recovery system and reduction in water consumption.
  • Optimum user convenience thanks to TouchControl

    Touch controls

    Greater user convenience and easy surface cleaning.
  • All the information is based on the sample configuration
PG8528

Product details - PG 8528

EAN: 4002515680940 / Mat. no. 10339600
Construction type and version 
Construction type
2 glazed lift doors

Vertical door opening

The lift-up sliding door opens and closes the wash cabinet using a vertical, electronically controlled movement. In this way, the work area in front of the washer-disinfector remains freely accessible for transport trolleys or loading and unloading conveyors, for example. The optional lift-up sliding door in easy-to-clean full glass also facilitates visual control of the load being processed.
Heating type
Steam/Electric convertible

Dual heating electricity/steam

Quick and flexible: these large-capacity washer-disinfectors have two heat sources for short cycle times (steam and electric heating). Alternatively, the machines can be heated using electricity only (if steam cannot be generated).
Front/back
Stainless Steel
Side panels
Stainless steel
Individual or row formation
Electrical door lock
Buzzer, acoustic signal at end of programme
Service-friendly design

Easy-to-service construction

Short service times thanks to maintenance-optimised appliance design.
Application 
Suitable for hospitals

Perfect for hospitals

These washer-disinfectors meet the requirements of hospitals particularly well. Thanks to their powerful wash technology and variety of programmes, they achieve outstanding reprocessing results even with high cycle throughput rates. In addition, a variety of appliance versions and accessories facilitate the perfect alignment to your needs on site.
Suitable for laboratories

Perfect for laboratories

These laboratory washers meet the requirements of a laboratory particularly well. Thanks to their powerful wash technology and variety of programmes including flexible loading variations to accommodate all kinds of laboratory glassware, they facilitate fast and analytically pure reprocessing.
Suitable for external instrument reprocessing

Suitable for external instrument reprocessing

These washer-disinfectors meet the requirements of professional instrument reprocessing particularly well. Designed to enable a high throughput of instruments, they achieve perfect reprocessing results for instruments in all medical disciplines, including challenging special instruments.
Capacity 
DIN mesh trays per cycle [number]
18
MIS sets per cycle [number]
3
AN sets per cycle [number]
7
DIN containers (300 x 300 x 600 mm) per cycle [number]
4
DIN containers (150 x 300 x 600 mm) per cycle [number]
6
Narrow-necked glassware per cycle [number]
232
Pipettes per cycle [number]
232
Performance data 
Circulation pump, Qmax in l/min.
400
Additional circulation pump for load carriers – direct coupling, Qmax in l/min.
600
Wash cabinet usable capacity in l
351
Tested operating hours

Note

Our machines undergo intensive testing under laboratory conditions. The actual operating hours may vary depending on actual usage behaviour, maintenance and care of the machine.
15.000
Tested service life in wash cycles

Note

Our machines undergo intensive testing under laboratory conditions. The actual wash cycles may vary depending on actual usage behaviour, maintenance, and care of the machine.
15.000
Controls 
Control system
Profitronic+
Programme selection
Touch on Glass

Touch on Glass

The high-quality, flush-fit glass surface is particularly easy to clean and thanks to innovative "Touch on Glass" controls it enables rapid access to all programmes and settings.
Programmability
programmable

Programmable controls

According to requirements: programmable controls enable perfect adaptation to suit individual needs.
Programmes [number]
16
Free programme positions [number]
31
A0 value controls

Intelligent A0-value controls

As soon as the prescribed A0 value is reached, the disinfection phase comes to an end and the programme continues in the next phase. Due to this system the cycle time is reduced, in comparison to a time-controlled programme.
Programme recontinuation in event of power outage

Programme failure protection

Time-saving and safe: The programme failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message.
Time left display
Programme sequence indicator
Selectable display languages

Adjustable display language

No misunderstandings: The user can select his/her language of choice from a number of different options. All display notifications appear in this language, so that the highest level of operating safety is ensured.
Standard electrical connection 
Mains connection
3 N AC 400 V 50 Hz
Electrical connection
3N AC 400V 50HZ
Fuse rating in A
32-35
Electric heating (with connection to 3 N AC 400 V 50 Hz) 
Heater rating in kW
18,00
Total connected load in kW
20,00
Fuse rating in A
3 x 32-35 A
Steam heating (with connection to 3 N AC 400 V 50 Hz) 
Total connected load in kW
9,00
Fuse rating in A
3 x 16 A
Electric heating, convertible to steam (with connection to 3 N AC 400 V 50 Hz) 
Total connected load in kW
20,00
Fuse rating in A
3 x 32-35 A
Water connection/drainage 
Cold water [number]
1
Hot water [number]

Efficient hot water connection

Connection to the warm water supply saves a lot of time and energy.
1
DI water [number]

DI water connection

Thanks to the connection for fully demineralised water (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Carrying out the final rinse with DI water also protects valuable wash items from deposits and corrosion.
2
Required flow pressure in kPa
200-1.000
Maximum water hardness (cold water/hot water) in mmol/l
0.710
Drain pump [DN]
22
Dump valve [DN]
50
Drying unit

Info

The drying unit is available as an optional extra for
- G 7823
- G 7824
- G 7825
- G 7826
- PG 8527
- PG 8528
- PLW 8615
- PLW 8616
- PLW 8617
.
 
Heating mode drying unit
Electricity

Drying unit

Reliable reprocessing results achieved more quickly with hot air drying.
Heating mode drying unit (optional)
Steam
Air throughput in m³/h
250
Temperature settings in 1 °C steps
60-115
Time setting in 1 minute steps
1-240
HEPA filter class
H13

HEPA filters

Protection against contamination thanks to particle-free drying air.
Filtration efficiency HEPA filter (DIN EN 1822) in %
99,950
HEPA filter service life in h
1.000
Electric heater rating in kW
7,2
Dimensions and weight 
External dimensions, net height in mm
2,420
External dimensions, net width in mm
1,150
External dimensions, net depth in mm
870
External dimensions incl. plinth/floor tray and top casing, height in mm
2.420
External dimensions, gross height in mm
1,830
External dimensions, gross width in mm
1,200
External dimensions, gross depth in mm
950
Wash cabinet, width in mm
650
Wash cabinet, height in mm
675
Wash cabinet, depth in mm
800
In-feed height above floor in mm
850
Net weight in kg
264
Gross weight in kg
272
Maximum floor loading in N

Maximum floor bearing capacity

Maximum floor bearing capacity states the maximum weight (N) that can be placed on the supporting surface on which the machine is installed. This maximum load bearing capacity is the result of adding up the weight of the machine, the load and the water in it, as well as the dynamic forces that occur during operation.
8000
Emissions data 
Sound pressure LpA in cleaning and drying according to DIN EN ISO 11201

Emissions - sound pressure at workplace

The emission sound pressure level depends on the programme and is a value given to the noise created by the machine. Miele Professional appliances have very low noise levels.
<70 dB(A) re 20 µPa
Heat output on the clean side into the room in Mj/h

Heat output into the room

During operation warm air is vented into the surrounding room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature.
2,16
Heat output on the unclean side into the room in Mj/h

Heat output into the room

During operation warm air is vented into the surrounding room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature.
2,16
Programmes 
Thermal disinfection (Vario TD)

Vario TD

The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Chemo-thermal disinfection

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Laboratory glassware

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Ophthalmic instruments

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Robotic instruments (ROBOTVARIO)

ROBOTVARIO

Valuable robotic instruments are reliably and economically reprocessed with the ROBOTVARIO system.
Orthopaedic instruments (ORTHOVARIO)

ORTHOVARIO

Even delicate orthopaedic instruments are reliably reprocessed with the ORTHOVARIO programme.
Theatre shoes

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Containers

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Cleaning-critical instruments (OXIVARIO/OXIVARIO Plus)

OXIVARIO

Organic soiling is removed particularly thoroughly and quickly with the OXIVARIO programme.
Features 
2 integrated bellows dispenser pumps for liquid media

Integrated dispenser pump

Integrated dispenser pumps facilitate the quick and precise dosing of liquid media.
Boiler for pre-heating DI water

Boiler for pre-heating DI water

Thanks to the boiler, preheated DI water is available for the final rinse, which reduces the programme duration considerably.
Steam condenser with heat recovery system

Steam condenser with heat recovery system

The warmth from the drying phase is collected via the steam condenser to pre-heat the VE water. Thus the process heat available is directly redirected back into the system. In the case of a steam condenser with heat recovery system, cooling with cold water is no longer necessary.
Attention: The use of a steam condenser with a heat recovery system is only possible in combination with a boiler!
Ultrasonic dispenser volume control

Ultrasonic dispenser control

Reproducible reprocessing quality thanks to the precise dosing of all the media.
Volumetric dispensing control
Spray arm monitoring

Spray arm monitoring

Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.
Interface for cycle documentation

Process documentation

Safety through the clear documentation of all the reprocessing steps.
Maintenance-free conductivity monitoring

Maintenance-free conductivity meter

Precise, maintenance-free conductivity meter monitoring: Residue-free final rinse for perfect results.
Multi-component filter system
Micro-fine filter

Micro fine filter

Reliable cleanliness: the large surface fine filter with a mesh of 0.2 mm can be relied upon to remove even the smallest particles from the wash water. For reliable reprocessing results and gentle care of the hydraulic components in the wash water circuit.
Automatic mobile unit recognition

Automatic mobile unit recognition

Particularly safe and convenient work processes thanks to automatic recognition of loading-specific programmes.
Load carriers – direct connection

Load carriers - direct connection

The direct connection guarantees the precise feed-in of water and drying air (in appliances with hot air drying) and the economical use of resources.
Customer service optical interface
Docking system for automatic transport systems

Docking station for transport systems

The option for the connection of automatic transport systems for load carriers is provided as standard.
Integrated printer for cycle documentation

Integrated printer

For paper-supported documentation, the integrated printer produces a comprehensive report on the process.
Heater elements outside wash cabinet

Heater elements outside the wash cabinet

A plus for hygiene: The heating elements are installed outside the wash cabinet.
Setting options for chemical agents (4 x 10 l)

Setting options for media canisters

Neat and tidy: The storage unit for liquid media.
Wash cabinet made from high-quality stainless steel (1.4301/304)
Plinth
Chamber lighting
Connection options 
RS 232 serial interface

RS 232 serial interface

The serial interface facilitates the exchange of data with other appliances, e.g. for process documentation.
Ethernet interface

Ethernet interface

The Ethernet interface enables cable-supported communication in the local network.
External dispenser modules
Central dispensing

Central dispensing

For users with a high throughput the machines can be simply connected to a central dispensing system.
Peak load cut-out/energy management
Norms, test certificates and symbols 
VDE (electrical safety)
RoHS guideline 2011/65/EU
Options 
Construction type
2 steel lift doors
Heating type
Electricity
Mains connection
3 AC 208 V 60 Hz
3 AC 230 V 50 Hz
3 N AC 380 V 60 Hz
3 AC 200 V 50 Hz
3 AC 200 V 60 Hz
3 AC 220 V 60 Hz
Drain pump [DN]
22
Dump valve [DN]
50
Features
Add. integrated DOS pumps

Additional integrable dispenser pumps

For applications that require additional media, additional dispenser pumps can be integrated into the machine.
Seismic anchoring
Prep. independent monitoring
CombiEco

Water recycling

Environmentally friendly and efficient: The VE water from the final wash cycle of the washer-disinfector PG 8528 is fed into the container and trolley washer and can then be used for cleaning and disinfection. This means that both machine systems can be used more efficiently in the CSSD.
Bar code scanner
Programme OXIVARIO

OXIVARIO

Organic soiling is removed particularly thoroughly and quickly with the OXIVARIO programme.
Programme ORTHOVARIO

ORTHOVARIO

Even delicate orthopaedic instruments are reliably reprocessed with the ORTHOVARIO programme.
Multiport
Plinth
Boiler for AD water

Boiler for pre-heating DI water

Thanks to the boiler, preheated DI water is available for the final rinse, which reduces the programme duration considerably.
Interface process documents

Process documentation

Safety through the clear documentation of all the reprocessing steps.
A wide range of accessories

Large selection of accessories

Comprehensive range of accessories for optimum cleaning performance and a variety of reprocessing options.
Steam condenser

Steam condenser

Effective moisture removal from exhaust air.
DK with heat recovery

Steam condenser with heat recovery system

The warmth from the drying phase is collected via the steam condenser to pre-heat the VE water. Thus the process heat available is directly redirected back into the system. In the case of a steam condenser with heat recovery system, cooling with cold water is no longer necessary.
Attention: The use of a steam condenser with a heat recovery system is only possible in combination with a boiler!
Active drying

Active drying

Active hot air drying ensures effective internal and exterior drying of the load.
Conductivity monitoring

Conductivity monitoring

Reliably clean: Residue-free final rinse for perfect results.
Connection auto. Conveyor sys.

Docking station for transport systems

The option for the connection of automatic transport systems for load carriers is provided as standard.
Integrated printer

Integrated printer

For paper-supported documentation the integrated printer produces a comprehensive report on the process.
Wash cabinet s/s 1.4404/316 L
Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs