G 7825 - Washer-disinfector - one door with usable capacity of 225 litres.--Stainless steel
  • - one door with usable capacity of 225 litres.--Stainless steel
 

G 7825
Washer-disinfector
- one door with usable capacity of 225 litres.

  • Capacity/cycle, e.g.108 narrow-necked glassware or 10DIN mesh trays

    Further stacking options

    Alternatively, 104 pipettes, 2 MIS or 4 AN sets can be reprocessed per cycle, for example.
  • Particularly narrow - only 900 mm wide
  • Can be individually customised - modular machine concept

    Modular machine design

    An efficient investment: The basic features can be enhanced by additional optional features as required.
  • Outstanding cleaning results thanks to 2 powerful pumps

    High circulation rate

    Powerful circulation pumps ensure thorough cleaning.
  • Fast cycle times thanks to pre-heated demineralised water

    Boiler for pre-heating DI water

    Thanks to the boiler, preheated DI water is available for the final rinse, which reduces the programme duration considerably.
  • All the information is based on the sample configuration
G7825

Product details - G 7825

EAN: 4002515680919 / Mat. no. 10339570
Construction type and version 
Construction type
1 steel hinged door
Heating type
Electricity
Front/back
Stainless Steel
Side panels
Stainless steel
Individual or row formation
Electrical door lock
Service-friendly design

Easy-to-service construction

Short service times thanks to maintenance-optimised appliance design.
Application 
Suitable for hospitals

Perfect for hospitals

These washer-disinfectors meet the requirements of hospitals particularly well. Thanks to their powerful wash technology and variety of programmes, they achieve outstanding reprocessing results even with high cycle throughput rates. In addition, a variety of appliance versions and accessories facilitate the perfect alignment to your needs on site.
Suitable for laboratories

Perfect for laboratories

These laboratory washers meet the requirements of a laboratory particularly well. Thanks to their powerful wash technology and variety of programmes including flexible loading variations to accommodate all kinds of laboratory glassware, they facilitate fast and analytically pure reprocessing.
Capacity 
DIN mesh trays per cycle [number]
10
MIS sets per cycle [number]
2
AN sets per cycle [number]
4
DIN containers (300 x 300 x 600 mm) per cycle [number]
2
DIN containers (150 x 300 x 600 mm) per cycle [number]
4
Narrow-necked glassware per cycle [number]
108
Pipettes per cycle [number]
104
Performance data 
Circulation pump, Qmax in l/min.
300
Additional circulation pump for load carriers – direct coupling, Qmax in l/min.
400
Wash cabinet usable capacity in l
225
Tested operating hours

Note

Our machines undergo intensive testing under laboratory conditions. The actual operating hours may vary depending on actual usage behaviour, maintenance and care of the machine.
15.000
Tested service life in wash cycles

Note

Our machines undergo intensive testing under laboratory conditions. The actual wash cycles may vary depending on actual usage behaviour, maintenance, and care of the machine.
15.000
Controls 
Control system
Profitronic
Programme selection
Rotary selector
Touch controls
Programmability
programmable

Programmable controls

According to requirements: programmable controls enable perfect adaptation to suit individual needs.
Programmes [number]
13
Free programme positions [number]
43
Programme recontinuation in event of power outage

Programme failure protection

Time-saving and safe: The programme failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message.
Time left display
Selectable display languages

Adjustable display language

No misunderstandings: The user can select his/her language of choice from a number of different options. All display notifications appear in this language, so that the highest level of operating safety is ensured.
Standard electrical connection 
Mains connection
3 N AC 400 V 50 Hz
Electrical connection
3N AC 400V 50HZ
Fuse rating in A
16
Electric heating (with connection to 3 N AC 400 V 50 Hz) 
Heater rating in kW
9,00
Total connected load in kW
10,00
Fuse rating in A
3 x 16 A
Steam heating (with connection to 3 N AC 400 V 50 Hz) 
Total connected load in kW
9,00
Fuse rating in A
3 x 16 A
Electric heating, convertible to steam (with connection to 3 N AC 400 V 50 Hz) 
Total connected load in kW
10,00
Fuse rating in A
3 x 16 A
Water connection/drainage 
Cold water [number]
1
Hot water [number]

Efficient hot water connection

Connection to the warm water supply saves a lot of time and energy.
1
DI water [number]

DI water connection

Thanks to the connection for fully demineralised water (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Carrying out the final rinse with DI water also protects valuable wash items from deposits and corrosion.
1
Required flow pressure in kPa
200-1.000
Maximum water hardness (cold water/hot water) in mmol/l
0.710
Drain pump [DN]
22
Dump valve [DN]
50
Drying unit

Info

The drying unit is available as an optional extra for
- G 7823
- G 7824
- G 7825
- G 7826
- PG 8527
- PG 8528
- PLW 8615
- PLW 8616
- PLW 8617
.
 
Heating mode drying unit
Electricity

Drying unit

Reliable reprocessing results achieved more quickly with hot air drying.
Heating mode drying unit (optional)
Steam
Air throughput in m³/h
250
Temperature settings in 1 °C steps
60-115
Time setting in 1 minute steps
1-240
HEPA filter class
H13

HEPA filters

Protection against contamination thanks to particle-free drying air.
Filtration efficiency HEPA filter (DIN EN 1822) in %
99,950
HEPA filter service life in h
500
Electric heater rating in kW
3,6
Dimensions and weight 
External dimensions, net height in mm
2,404
External dimensions, net width in mm
900
External dimensions, net depth in mm
750
External dimensions incl. plinth/floor tray and top casing, height in mm
2.404
External dimensions, gross height in mm
2,050
External dimensions, gross width in mm
1,200
External dimensions, gross depth in mm
800
Wash cabinet, width in mm
541
Wash cabinet, height in mm
683
Wash cabinet, depth in mm
600
In-feed height above floor in mm
850
Net weight in kg
360
Gross weight in kg
385
Maximum floor loading in N

Maximum floor bearing capacity

Maximum floor bearing capacity states the maximum weight (N) that can be placed on the supporting surface on which the machine is installed. This maximum load bearing capacity is the result of adding up the weight of the machine, the load and the water in it, as well as the dynamic forces that occur during operation.
6524
Emissions data 
Sound pressure LpA in cleaning and drying according to DIN EN ISO 11201

Emissions - sound pressure at workplace

The emission sound pressure level depends on the programme and is a value given to the noise created by the machine. Miele Professional appliances have very low noise levels.
<70 dB(A) re 20 µPa
Heat dissipation into the room in MJ/h

Heat output into the room

During operation warm air is vented into the surrounding room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature.
2,52
Programmes 
Thermal disinfection (Vario TD)

Vario TD

The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Chemo-thermal disinfection

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Laboratory glassware

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Theatre shoes

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Containers

Individual programme configuration

The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Cleaning-critical instruments (OXIVARIO/OXIVARIO Plus)

OXIVARIO

Organic soiling is removed particularly thoroughly and quickly with the OXIVARIO programme.
Features 
2 integrated hose dispenser pumps for liquid media

Integrated dispenser pump

Integrated dispenser pumps facilitate the quick and precise dosing of liquid media.
Steam condenser

Steam condenser

Effective moisture removal from exhaust air.
Volumetric dispensing control
Interface for cycle documentation

Process documentation

Safety through the clear documentation of all the reprocessing steps.
Multi-component filter system
Automatic mobile unit recognition

Automatic mobile unit recognition

Particularly safe and convenient work processes thanks to automatic recognition of loading-specific programmes.
Load carriers – direct connection

Load carriers - direct connection

The direct connection guarantees the precise feed-in of water and drying air (in appliances with hot air drying) and the economical use of resources.
Customer service optical interface
Integrated printer for cycle documentation

Integrated printer

For paper-supported documentation, the integrated printer produces a comprehensive report on the process.
Setting options for chemical agents (3 x 5 l / 2 x 10 l)

Setting options for media canisters

Neat and tidy: The storage unit for liquid media.
Wash cabinet made from high-quality stainless steel (1.4301/304)
Plinth, on wheels

Mobile plinth

To make it easy to service, the appliance can be installed on a mobile plinth.
Connection options 
RS 232 serial interface, expandable with USB

RS 232 serial interface

The serial interface facilitates the exchange of data with other appliances, e.g. for process documentation.
Central dispensing

Central dispensing

For users with a high throughput the machines can be simply connected to a central dispensing system.
Peak load cut-out/energy management
Norms, test certificates and symbols 
VDE (electrical safety)
RoHS guideline 2011/65/EU
Options 
Construction type
1 glazed steel hinged door
Heating type
Steam
Mains connection
3 AC 208 V 60 Hz
3 AC 230 V 50 Hz
3 N AC 380 V 60 Hz
3 AC 200 V 50 Hz
3 AC 200 V 60 Hz
3 AC 220 V 60 Hz
Drain pump [DN]
22
Dump valve [DN]
50
Features
Add. integrated DOS pumps

Additional integrable dispenser pumps

For applications that require additional media, additional dispenser pumps can be integrated into the machine.
Programme OXIVARIO

OXIVARIO

Organic soiling is removed particularly thoroughly and quickly with the OXIVARIO programme.
Plinth
Plinth, on wheels
Boiler for AD water

Boiler for pre-heating DI water

Thanks to the boiler, preheated DI water is available for the final rinse, which reduces the programme duration considerably.
A wide range of accessories

Large selection of accessories

Comprehensive range of accessories for optimum cleaning performance and a variety of reprocessing options.
Steam condenser

Steam condenser

Effective moisture removal from exhaust air.
Active drying

Active drying

Active hot air drying ensures effective internal and exterior drying of the load.
Integrated printer

Integrated printer

For paper-supported documentation the integrated printer produces a comprehensive report on the process.
Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs