G 7825 - Washer-disinfector - one door with usable capacity of 225 litres.--Stainless steel
  • - one door with usable capacity of 225 litres.--Stainless steel
 

G 7825
Washer-disinfector
- one door with usable capacity of 225 litres.

  • Capacity/cycle, e.g.108 narrow-necked glassware or 10DIN mesh trays

    Further stacking options

    Alternatively, 104 pipettes, 2 MIS or 4 AN sets can be reprocessed per cycle, for example.
  • Particularly narrow - only 900 mm wide
  • Can be individually customised - modular machine concept

    Modular machine design

    An efficient investment: The basic features can be enhanced by additional optional features as required.
  • Outstanding cleaning results thanks to 2 powerful pumps

    High circulation rate

    Powerful circulation pumps ensure thorough cleaning.
  • Fast cycle times thanks to pre-heated demineralised water

    Boiler for pre-heating DI water

    Thanks to the boiler, preheated DI water is available for the final rinse, which reduces the programme duration considerably.
  • All the information is based on the sample configuration
G7825

Optional Accessories - G 7825

E 527/2 Mobile unit
E 527/2Mobile unit

for the optimum loading of 2 DIN containers including lids.

E 791 Connector
E 791Connector

for the optimum connection of female Luer lock/male Luer lock.

E 528/2 Mobile unit
E 528/2Mobile unit

for optimum loading of 3 small DIN containers including lids.

ID 180 Injector nozzle
ID 180Injector nozzle

with plastic supports, Ø 4, length 180 mm.

E 111 Insert
E 111Insert

For the optimum loading of beakers from 600 to 1,000 ml.

E 744 Module
E 744Module

for the optimum loading of narrow necked glassware 500 - 1,000 ml.

E 529 Mobile unit
E 529Mobile unit

for optimum loading of 4-5 ophthalmic theatre sets.

E 743 Module
E 743Module

for the optimum loading of narrow necked glassware 100 - 500 ml.

E 550 Mobile unit
E 550Mobile unit

for cleaning instruments on 1 level.

APH 301 Connection cable type 1
APH 301Connection cable type 1

for connection of a machine with serial interface for a PC/Net500.

E 109 Insert
E 109Insert

for the optimum loading of beakers up to 250 ml.

E 555/2 Mobile unit
E 555/2Mobile unit

for cleaning instruments on 2 levels.

E 118 Insert
E 118Insert

for the optimum loading of half petri dishes.

E 742 Module
E 742Module

for the optimum loading of different wash items.

E 353 Clamps
E 353Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

FP 20 Filter plates
FP 20Filter plates

for the reprocessing of contra angles and hand pieces when using AUF 1/AUF 2.

A 16 Lid
A 16Lid

For fixing delicate wash items.

E 352 Injector nozzle
E 352Injector nozzle

For the optimum cleaning of the wash items.

ID 110 Injector nozzle
ID 110Injector nozzle

with plastic supports, Ø 3, length 110 mm.

E 524/2 Mobile unit
E 524/2Mobile unit

for cleaning instruments on 3 levels.

A 2 Cover net
A 2Cover net

For fixing delicate wash items.

E 747 Module
E 747Module

for optimum loading of centrifuge tubes, phials and test tubes, for example.

E 351 Injector nozzle
E 351Injector nozzle

For the optimum cleaning of the wash items. Size 4 x 160 mm.

E 110 Insert
E 110Insert

for the optimum loading of beakers from 250 to 600 ml.

E 525/2 Mobile unit
E 525/2Mobile unit

for cleaning instruments on 3 - 4 levels.

E 746 Module
E 746Module

for the optimum loading of up to 23 pipettes.

E 745/1 Module
E 745/1Module

for the optimum loading of up to 104 pipettes.

E 336 Irrigation sleeves
E 336Irrigation sleeves

For the optimum loading of pipettes/MIS instruments in injector units.

APH 302 Connection cable type 2
APH 302Connection cable type 2

for connection of a machine with serial interface for a PC/Net500.

E 526/1 Mobile unit
E 526/1Mobile unit

for the optimum stacking of MIS instruments and accessories on 2 levels.

E 750 Frames
E 750Frames

for the optimum securing of different inserts.

ADS 1 Silicone adaptor
ADS 1Silicone adaptor

For holding transmission instruments when using AUF 1 or AUF 2.

E 729 Insert
E 729Insert

for optimum loading of up to 4-5 ophthalmic theatre sets on 3 levels.

APH 110 NET500 Network converter
APH 110 NET500Network converter

for connection of machines with serial interface for a network.

E 135/1 Insert
E 135/1Insert

for optimum loading of 19 baby bottles up to 110 ml.

E 106/2 Insert
E 106/2Insert

For the optimum loading of wide neck flasks, measuring cylinders, etc.

E 135 Insert
E 135Insert

for optimum loading of 19 baby bottles up to 250 ml.

APH 591 Paper roll
APH 591Paper roll

for PRT 100 report printer.

E 755 Module
E 755Module

for the optimum loading of narrow necked glassware 25 - 100 ml.

E 715/1 Mobile unit
E 715/1Mobile unit

for holding up to 4 AN sets and/or 12 breathing tubes (1.5 m) and accessories.

E 135/2 Insert
E 135/2Insert

for optimum loading of 19 baby bottles up to 90 ml.

E 713 Mobile unit
E 713Mobile unit

for loading of 2 DIN containers including lids as well as 4 mesh trays on 3 levels.

A 18 Lid
A 18Lid

For fixing delicate wash items.

E 711/1 Mobile unit
E 711/1Mobile unit

for optimum loading of 2 DIN containers including lids.

E 135/3 Insert
E 135/3Insert

for optimum loading of 19 baby bottles up to 120 ml.

E 106/1 Insert
E 106/1Insert

For the optimum loading of wide neck flasks, measuring cylinders, etc.

E 710/1 Mobile unit
E 710/1Mobile unit

for optimum loading of 4 DIN containers including lids.

E 136 Insert
E 136Insert

for optimum loading of 56 half petri dishes.

APH 500 PRT 100 Printer
APH 500 PRT 100Printer

for printing process reports.

E 730 Insert
E 730Insert

for the optimum loading of 20 theatre shoes.

MVA Fitting kit
MVAFitting kit

for installation of the machine without a plinth tray.

ADS 3 Silicone adaptor
ADS 3Silicone adaptor

For holding transmission instruments when using AUF 1 or AUF 2.

MAV 23/24 Dresser panelling
MAV 23/24Dresser panelling

for cladding the steam condenser incl. service door, for G 7823/24.

E 757 Mobile unit
E 757Mobile unit

for the optimum loading of large volume laboratory glassware.

ADS 2 Silicone adaptor
ADS 2Silicone adaptor

For holding transmission instruments when using AUF 1 or AUF 2.

E 703/1 Attachment
E 703/1Attachment

for the optimum loading of up to 7 hollow instruments.

E 735/2 Mobile unit
E 735/2Mobile unit

for the optimum loading of instruments on 3 levels.

ID 140 Injector nozzle
ID 140Injector nozzle

with plastic supports, Ø 4, length 140 mm.

E 142 Insert
E 142Insert

For holding different instruments.

ID 160 Injector nozzle
ID 160Injector nozzle

with plastic supports, Ø 4, length 160 mm.

E 106 Insert
E 106Insert

For the optimum loading of wide neck flasks, measuring cylinders, etc.

E 143 Insert
E 143Insert

For optimum accommodation of different instruments.

E 702 Attachment
E 702Attachment

to increase capacity by two further mesh trays.

APH 530 Connection cable
APH 530Connection cable

For interruption-free connection to the printer.

E 144 Insert
E 144Insert

For the optimum loading of up to 18 beakers.

E 775/1 Mobile unit
E 775/1Mobile unit

for the optimum cleaning of instruments on 2 levels.

E 701/2 Mobile unit
E 701/2Mobile unit

for the optimum loading of mesh trays on 4 levels.

APH 531 Adapter
APH 531Adapter

For connecting the Miele printer cable to the appliance.

E 741/1 Mobile unit
E 741/1Mobile unit

for the optimum loading of modules on 1 - 4 levels.

E 149 Insert
E 149Insert

for optimum loading of 80 test tubes, 16 x 105 mm.

E 752 Module
E 752Module

for the optimum loading of narrow necked glassware 100 - 1,000 ml.

APH 190 Wall bracket
APH 190Wall bracket

for Segosoft modules.

E 790 Connector
E 790Connector

for the optimum connection of female Luer lock/female Luer lock.

UTS Utensil box
UTSUtensil box

for the ideal cleaning of small parts.

MAV 25/26 Dresser panelling
MAV 25/26Dresser panelling

for cladding the steam condenser incl. service door, for G 7825/26.

E 457 Insert
E 457Insert

for the optimum loading of separable MIS instruments.

APH 408 Crossover network cable
APH 408Crossover network cable

for direct connection to PC, length 3 m (type 8).

E 905/1 Module
E 905/1Module

for optimum loading of MIS instruments, such as arthroscopy and urology.

APH 305 Extension cable
APH 305Extension cable

10 m, for the extension of connection cable type 1 and 2.

E 479 Holder
E 479Holder

for micro instruments up to 4 mm Ø.

E 451 Mesh trays
E 451Mesh trays

For optimum accommodation of different instruments.

ML Magnets
MLMagnets

for automatic mobile unit recognition.

E 449 Adapter
E 449Adapter

for the connection of female Luer lock connectors.

E 484 Insert
E 484Insert

for holding different utensils

E 448 Silicone hose
E 448Silicone hose

for the optimum cleaning of various instruments.

SD-B Injector nozzle
SD-BInjector nozzle

for butyrometers.

E 485 Brackets
E 485Brackets

for the optimum loading of 3 kidney trays.

ID 240 Injector nozzle
ID 240Injector nozzle

with plastic supports, Ø 6, length 240 mm.

E 447 Adapter
E 447Adapter

for the connection of male Luer lock connectors.

APH 304 Extension cable
APH 304Extension cable

5 m, for the extension of connection cable type 1 and 2.

E 446 Irrigation sleeve cover
E 446Irrigation sleeve cover

for the optimum securing of instruments in irrigation sleeves.

E 486 Brackets
E 486Brackets

for the optimum loading of basins.

A 3 Cover net
A 3Cover net

As cover for wash items in inserts.

E 903/1 Module
E 903/1Module

for the optimum loading of TUR sets (transurethral resection).

E 445 Irrigation sleeve cover
E 445Irrigation sleeve cover

for the optimum securing of instruments in irrigation sleeves.

E 487 Brackets
E 487Brackets

for optimum loading of 4 theatre shoes up to a height of 280 mm.

A 7/1 Perforated tray inlay
A 7/1Perforated tray inlay

For the gentle cleaning of delicate items by interrupting the spray jet.

E 906/1 Module
E 906/1Module

for optimum loading of MIS instruments, such as arthroscopy and urology.

E 469 Irrigation sleeves
E 469Irrigation sleeves

for the optimum loading of MIS instruments from urology, L 300 mm, Ø 11 mm.

DOS 60/30 Dispenser pump
DOS 60/30Dispenser pump

For dispensing liquid neutral/alkaline media.

TK/1 Test kit
TK/1Test kit

For monitoring the cleaning performance by measuring protein contamination.

E 470 Injector nozzle
E 470Injector nozzle

for use in the mobile injector unit, Ø 2.5 x 90 mm.

APH 407 Network cable
APH 407Network cable

for connection to the network, length 5 m (type 7).

E 468 Insert
E 468Insert

for the optimum loading of different utensils.

E 936 Insert
E 936Insert

for optimum loading of up to 15 lamp handles.

APS 201 Sego Segosoft Miele Edition USB solution
APS 201 SegoSegosoft Miele Edition USB solution

for seamless and legally watertight documentation via USB stick.

PG 8597 Aqua-Soft system
PG 8597Aqua-Soft system

Twin-tank water softener for the continuous removal of soft water up to 40 °dH

E 467 Irrigation sleeves
E 467Irrigation sleeves

For MIS instruments/clip forceps, length 205 mm, Ø 11 mm.

E 471 Spring clip
E 471Spring clip

for injector jets with a Ø of 2.5 mm.

E 466 Injector nozzle
E 466Injector nozzle

for the optimum loading of breathing bags 8 x 333 mm.

E 464 Holder
E 464Holder

For E 454 injector nozzles Ø 13 x 65 mm.

E 472 Spring clip
E 472Spring clip

for injector jets with a Ø of 4 mm.

APH 406 Network cable
APH 406Network cable

for connection to the network, length 3 m (type 6).

E 475 Holding bar
E 475Holding bar

for stabilising sleeves.

E 907/1 Mesh trays
E 907/1Mesh trays

for the optimum loading of different small-scale instruments.

E 460 Insert
E 460Insert

for the optimum loading of different MIS instruments.

E 476 Holder
E 476Holder

for micro instruments with a Ø of 4-8 mm.

ID 90 Injector nozzle
ID 90Injector nozzle

with plastic supports, Ø 3, length 90 mm.

E 458 Insert
E 458Insert

for the optimum loading of screw-cap teats.

E 477 Holders
E 477Holders

for micro instruments.

E 444 Insert
E 444Insert

for the optimum loading of cold-light cables and suction hoses.

MF/3 Trolleys
MF/3Trolleys

for loading & unloading washer-&disinfectors.

FP ED Filter plates
FP EDFilter plates

Suitable for reprocessing, made of stainless steel, for narrow lumen cannula

SBW/2 Plinth
SBW/2Plinth

including drip tray and openings for connecting services to G 7825/26.

ID 220 Injector nozzle
ID 220Injector nozzle

with plastic supports, Ø 6, length 220 mm.

E 515/1 Mobile unit
E 515/1Mobile unit

for optimum loading of approx. 3 anaesthesia sets.

E 792 Silicone hose with connection
E 792Silicone hose with connection

for the connection to female Luer lock connectors.

E 427 Insert
E 427Insert

for the optimum loading of 6 laryngoscopes.

E 362 Blind stopper
E 362Blind stopper

For the sealing of fittings to load carriers.

E 354 Clamps
E 354Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

AUF 1 Holder
AUF 1Holder

for optimum reprocessing of transmission instruments in upper basket O 177/1.

E 496 Injector nozzle
E 496Injector nozzle

with retaining clamp for intubation material.

APH 590 Ink cartridge
APH 590Ink cartridge

for PRT 100 report printer.

APH 303 Extension cable
APH 303Extension cable

3 m, for the extension of connection cable type 1 and 2.

E 443 Irrigation sleeves
E 443Irrigation sleeves

for the optimum cleaning of MIS instruments.

APH 409 Crossover network cable
APH 409Crossover network cable

for direct connection to PC, length 5 m (type 9).

APS 101 Sego Segosoft Miele Edition (additional licences)
APS 101 SegoSegosoft Miele Edition (additional licences)

For connection with a second or additional appliance.

E 488 Brackets
E 488Brackets

for the optimum loading of respiratory masks.

E 442 Irrigation sleeves
E 442Irrigation sleeves

for the optimum cleaning of MIS instruments.

E 489 Universal bracket
E 489Universal bracket

for loading diverse wash items such as insoles for theatre shoes.

E 364 Insert
E 364Insert

for the optimum loading of 36 wide-necked teats.

SBWR/2 Plinth, on wheels
SBWR/2Plinth, on wheels

including drip tray without openings for connecting services to G 7825.

APS 102 Sego SegoAssign Plus
APS 102 SegoSegoAssign Plus

To connect the Segosoft with the in-house patient management system.

ID 200 Injector nozzle
ID 200Injector nozzle

with plastic supports, Ø 6, length 200 mm.

Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs