PLW 8617 [EL/S TH RT] - Lab washer, steam/electrically heated - single door, with pre-heating and recycling tank, 1150 mm wide, 351 usable capa.--stainless steel exterior
  • - single door, with pre-heating and recycling tank, 1150 mm wide, 351 usable capa.--stainless steel exterior
 

PLW 8617 [EL/S TH RT]
Lab washer, steam/electrically heated
- single door, with pre-heating and recycling tank, 1150 mm wide, 351 usable capa.

  • Capacity/cycle, e.g.216 laboratory flasks, 588vials or 294pipettes
  • Short cycle times thanks to pre-heated demineralised water

    Heated tank

    Programme durations are shortened as water is already pre-heated in the tank.
  • Environmentally friendly thanks to recycling tank

    Recycling tank

    Environmentally friendly: efficiently saves on water and energy.
  • Flexible and simple – modular load carriers & EasyLoad system

    Versatile load carriers

    The versatile load carriers from Miele Professional offer a hugely diverse range of possibilities with regard to loading.
    The load carriers can be flexibly adapted to the wash items in just a few steps with a small number of load carriers in combination with some additional modules and inserts. This saves costs as well as space.

    EasyLoad

    The EasyLoad system makes reprocessing laboratory glassware considerably faster, simpler and more reliable. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as height adjustment of the holders is no longer necessary thanks to the smart combination of nozzles and holding frames. This makes correct positioning extremely easy.
  • Efficient – strong pump power with the variable-speed pump

    The heart of perfect results

    The two-pump technology is at the heart of Miele's lab washers. The variable-speed pump is especially versatile when connecting the basket. The pump adapts the wash pressure and required water to the specific requirements – high pressure facilitates the removal of stubborn stains, while low pressure ensures complete wetting of the whole load. This guarantees minimum use of resources with outstanding wash results.
  • Reliable results – spray arm monitoring and conductivity meter

    Spray arm monitoring

    Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.

    Conductivity monitoring

    Reliably clean: Residue-free final rinse for perfect results.
PLW8617 [EL/S TH RT]

Optional Accessories - PLW 8617 [EL/S TH RT]

A 606 Module
A 606Module

for the use of e.g. lab glassware inserts on the top level of A 503 mobile units

A 840/2 Injector nozzle
A 840/2Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 10 items.

A 843/3 Injector nozzle
A 843/3Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 20 items

A 841/2 Injector nozzle
A 841/2Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 10 items 

A 845/3 Injector nozzle
A 845/3Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 20 items. 

A 841/1 Injector nozzle
A 841/1Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 5 items 

A 842/1 Injector nozzle
A 842/1Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 5 items 

A 846 Injector nozzle
A 846Injector nozzle

with support, for cleaning laboratory flasks and round flasks.

A 503 Mobile unit
A 503Mobile unit

no levels, for cleaning laboratory glassware/utensils.

A 844/2 Injector nozzle
A 844/2Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 10 items. 

A 843/1 Injector nozzle
A 843/1Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 5 items

A 844 Injector nozzle
A 844Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 1 item.

A 840/1 Injector nozzle
A 840/1Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 5 items.

A 842/3 Injector nozzle
A 842/3Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 20 items

A 841 Injector nozzle
A 841Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 1 item

A 847 Injector nozzle
A 847Injector nozzle

with support, for cleaning Erlenmeyer flasks.

A 843 Injector nozzle
A 843Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 1 item

A 620 Module
A 620Module

for the optimum reprocessing of laboratory glassware, 10 injector positions.

A 843/2 Injector nozzle
A 843/2Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 10 items

A 622 Module
A 622Module

For the optimum reprocessing of laboratory glassware, 36 injector positions.

A 845/1 Injector nozzle
A 845/1Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 5 items.

A 612 Module
A 612Module

for the optimum reprocessing of large-volume laboratory glassware.

A 621 Module
A 621Module

for the optimum reprocessing of laboratory glassware, 20 injector positions.

A 850 Holder rack 
A 850Holder rack 

For injector module A 620.

A 845/2 Injector nozzle
A 845/2Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 10 items.

A 844/3 Injector nozzle
A 844/3Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 20 items.

A 851 Holder rack 
A 851Holder rack 

For injector module A 621.

A 852 Holder rack 
A 852Holder rack 

For injector module A 622.

A 840 Injector nozzle
A 840Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 1 item. 

A 842/2 Injector nozzle
A 842/2Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 10 items

A 848 Injector nozzle
A 848Injector nozzle

with support, for cleaning measuring cylinders.

A 844/1 Injector nozzle
A 844/1Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 5 items.

A 842 Injector nozzle
A 842Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 1 item 

A 845 Injector nozzle
A 845Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 1 item.

A 841/3 Injector nozzle
A 841/3Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 20 items

Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs