PLW 6111 [DP WS SC CL H14]
Laboratory washer with 3 wash levels in SlimLine design
with steam condenser, water softener and chamber lighting.

Cap./cycle 126 narrow-necked glassware/121pipettes – 210 l usable capacity
Further loading options
Alternatively, 468 test tubes or 84 laboratory flasks can be reprocessed per cycle.
Ergonomic loading and unloading – telescopic runners
Flexible – 4 different level positions
SmartLoad
Wash and dry with hot air on three separate wash levels, can be used flexibly in three positions.
Have everything in view thanks to the full-glass door
Full-glass door
In combination with the chamber lighting, the glass door allows a visual check of the current process.
High capacity – reprocessing of flasks up to 50 l
Large wash chamber
The spacious chamber provides room for large containers (up to 50 litres and 630 mm in height).

More product information

Contact

Save & Compare

PLW6111 [DP WS SC CL H14]

Product details - PLW 6111 [DP WS SC CL H14]

EAN: 4002516040934 / Article no. 62611114GB / Mat. no. 10958550

Construction type and version
Construction type	Freestanding, 1 glazed hinged door
Heating type	Electricity
Front/back	Stainless Steel
Side panels	Stainless steel
Slimline design	• SlimLine design The slim design, just 650 mm wide, fits in the smallest of spaces while ensuring a high capacity.
Number of wash levels	3
Loading and unloading with telescopic runners	• Telescopic runners The telescopic runners in the wash chamber make it even easier to load and unload items.
Electrical door lock	•
Buzzer, acoustic signal at end of programme	•
Service-friendly design	• Easy-to-service construction Short service times thanks to maintenance-optimised appliance design.
Application
Suitable for laboratories	• Perfect for laboratories These laboratory washers meet the requirements of a laboratory particularly well. Thanks to their powerful wash technology and variety of programmes including flexible loading variations to accommodate all kinds of laboratory glassware, they facilitate fast and analytically pure reprocessing.
Capacity
Narrow-necked glassware per cycle [number]	126
Test tubes per cycle [number]	468
Laboratory flasks per cycle [number]	84
Pipettes per cycle [number]	121
Performance data
Circulation pump, Qmax in l/min.	700
Wash cabinet usable capacity in l	210
Controls
Control system	MP.CON 3
Programme selection	Touch on Glass Touch on Glass The high-quality, flush-fit glass surface is particularly easy to clean and thanks to innovative "Touch on Glass" controls it enables rapid access to all programmes and settings.
Programmability	Freely programmable
Programmes [number]	18
Free programme positions [number]	20
Programme recontinuation in event of power outage	• Programme failure protection Time-saving and safe: The programme failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message.
Time left display	•
Programme sequence indicator	•
Selectable display languages	• Adjustable display language No misunderstandings: The user can select his/her language of choice from a number of different options. All display notifications appear in this language, so that the highest level of operating safety is ensured.
Standard electrical connection
Electrical connection	3N AC 380-400V 50HZ
Heater rating in kW	7.50
Total connected load in kW	8.25
Fuse rating in A	16
Length of mains cable in m	2.00
Water connection/drainage
Cold water [number]	1
Hot water [number] Efficient hot water connection Connection to the warm water supply saves a lot of time and energy.	1
DI water [number] DI water connection Thanks to the connection for fully demineralised water (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Carrying out the final rinse with DI water also protects valuable wash items from deposits and corrosion.	1
Required flow pressure in kPa	100-800
Built-in water softener	• Integrated water softener The integrated water softener ensures an optimum reprocessing result.
Maximum water hardness (cold water/hot water) in mmol/l	0.700
Drain pump [DN]	22
Drying unit Info The drying unit is available as an optional extra for - G 7823 - G 7824 - G 7825 - G 7826 - PG 8527 - PG 8528 - PLW 8615 - PLW 8616 - PLW 8617 .
Heating mode drying unit	Electricity Drying unit Reliable reprocessing results achieved more quickly with hot air drying.
Air throughput in m³/h	150
Temperature settings in 1 °C steps	0-160
Time setting in 1 minute steps	0-120
HEPA filter class	H14 HEPA filters Protection against contamination thanks to particle-free drying air.
Filtration efficiency HEPA filter (DIN EN 1822) in %	99,995
HEPA filter service life in h	1.000
Electric heater rating in kW	4,0
Dimensions and weight
External dimensions, net height in mm	1,870
External dimensions, net width in mm	650
External dimensions, net depth in mm	687
External dimensions, gross height in mm Note Including packaging	2,110
External dimensions, gross width in mm Note Including packaging	945
External dimensions, gross depth in mm Note Including packaging	840
Wash cabinet, width in mm	540
Wash cabinet, height in mm	665
Wash cabinet, depth in mm	585
In-feed height above floor in mm	850
Net weight in kg	251
Gross weight in kg Note Including packaging	260
Maximum floor loading in N Maximum floor bearing capacity Maximum floor bearing capacity states the maximum weight (N) that can be placed on the supporting surface on which the machine is installed. This maximum load bearing capacity is the result of adding up the weight of the machine, the load and the water in it, as well as the dynamic forces that occur during operation.	4000
Emissions data
Sound pressure LpA in cleaning and drying according to DIN EN ISO 11201 Emissions - sound pressure at workplace The emission sound pressure level depends on the programme and is a value given to the noise created by the machine. Miele Professional appliances have very low noise levels.	<70 dB(A) re 20 µPa
Heat dissipation into the room in MJ/h Heat output into the room During operation warm air is vented into the surrounding room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature.	1,26
Programmes
Thermal disinfection	• Individual programme configuration The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Laboratory glassware	• Individual programme configuration The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Plastics	• Individual programme configuration The cleaning programmes are customised by Miele to meet specific customer requirements. These customer-specific cleaning programmes are transferred to the control unit during commissioning.
Features
2 integrated hose dispenser pumps for liquid media	• Integrated dispenser pump Integrated dispenser pumps facilitate the quick and precise dosing of liquid media.
Steam condenser	• Steam condenser Effective moisture removal from exhaust air.
Volumetric dispensing control	•
Interface for cycle documentation	• Process documentation Safety through the clear documentation of all the reprocessing steps.
Multi-component filter system	•
Load carriers – direct connection	• Load carriers - direct connection The direct connection guarantees the precise feed-in of water and drying air (in appliances with hot air drying) and the economical use of resources.
Integrated hot-air drying	• Integrated hot-air drying All reprocessing items are dried efficiently using hot air filtered with a HEPA filter.
Setting options for chemical agents (3 x 5 l)	• Setting options for media canisters Neat and tidy: The storage unit for liquid media.
Wash cabinet made from high-quality stainless steel (1.4404/316L)	• Wash cabinet grade 316L The wash cabinet is made of high-quality stainless steel 1.4404 (AISI 316L).
Plinth	•
Chamber lighting	•
Connection options
RS 232 serial interface	• RS 232 serial interface The serial interface facilitates the exchange of data with other appliances, e.g. for process documentation.
Norms, test certificates and symbols
CE	•
EN 61010-2-040	•
RoHS guideline 2011/65/EU	•
Machinery Directive 2006/42/EC	•