PLW 6111 [DP SC CL H14]

Laboratory washer with 3 wash levels in SlimLine design

with steam condenser and chamber lighting.

with plastic support, conical, Ø 2.5, length 50 mm.

for injector nozzles Ø 2.5 mm.

Height 250 mm, for securing delicate wash items.

with 42 unoccupied injector slots for nozzles.

with 110 unoccupied injector slots for nozzles with Ø 2.5 mm.

with cap for pipettes, maximum Ø 11 mm

with 56 unoccupied injector slots for nozzles with Ø 2.5 mm.

with 121 unoccupied injector slots for nozzles with Ø 2.5 mm.

Height 45 mm, for securing delicate wash items.

equipped with 30 APLW 066 injector nozzles and 12 APLW 067 injector nozzles.

with 16 unoccupied injector slots.

with 24 unoccupied injector slots for nozzles.

equipped with APLW 055 injector nozzles

for optimum loading of test tubes, height 200 mm.

with plastic support for securing load items with clamp, Ø 6, length 275 mm.

with 121 unoccupied injector slots for nozzles with Ø 2.5 mm.

equipped with 121 APLW 047 injector nozzles.

for sealing unused openings on load carriers.

with plastic support, star-shaped, Ø 2.5, length 155 mm.

with 121 + 24 unoccupied injector slots.

with 70 unoccupied injector slots for nozzles with Ø 2.5 mm.

with plastic support, star-shaped with clamp, Ø 6, length 175 mm.

with plastic support, star-shaped with clamp, Ø 6, length 225 mm.

for optimum loading of test tubes, height 130 mm.

for pipettes with maximum 14 mm and  minimum 4 mm diameter.

equipped with 42 APLW 052 injector nozzles.

with plastic support, star-shaped with clamp, Ø 6, length 135 mm.

equipped with 32 APLW 051 injector nozzles and 10 APLW 055 injector nozzles.

Height 175 mm, for securing delicate wash items.

equipped with 121 APLW 048 injector nozzles and 24 APLW 051 injector nozzles.

with plastic support, star-shaped, Ø 4, length 75 mm.

with 27 unoccupied injector slots.

with 121 unoccupied injector slots.

height-adjustable, for securing delicate wash items

with 16 unoccupied injector slots for nozzles.

for optimum loading of 3 pipette cartridges.

equipped with 121 APLW 047 injector nozzles.

for optimum loading of up to 56 pipettes.

for optimum loading of half petri dishes.

for optimum loading of large-volume laboratory glassware, 5 and 10 l.

with 27 unoccupied injector slots for nozzles.

for optimum loading of large-volume laboratory glassware, up to 50 l.

with plastic support, conical, and spring holder, Ø 2.5, length 80 mm.

with plastic support, star-shaped with clamp, Ø 4, length 175 mm.

to create an even surface.

with 121 + 24 unoccupied injector slots for nozzles.

with plastic support, star-shaped with clamp, Ø 6, length 275 mm.

with 27 unoccupied injector slots for nozzles.

for optimum loading of test tubes, height 100 mm.

equipped with 42 APLW 051 injector nozzles

equipped with 121 APLW 048 injector nozzles and 24 APLW 056 injector nozzles.

with plastic support, star-shaped, Ø 2.5, length 80 mm.

with 42 unoccupied injector slots.

for optimum loading of large-volume laboratory glassware, up to 20 l.

with 110 unoccupied injector slots for nozzles with Ø 2.5 mm.

with 12 unoccupied injector slots for nozzles.

with plastic support for securing load items, Ø 6, length 135 mm.

with plastic support, star-shaped, Ø 6, length 115 mm.

with 156 unoccupied injector slots for nozzles with Ø 2.5 mm.

with plastic support, star-shaped with clamp, Ø 4, length 110 mm.

with plastic support, conical, Ø 2.5, length 80 mm.

equipped with 32 APLW 051 injector nozzles and 10 APLW 055 injector nozzles

for optimum loading of laboratory glassware on the lowest level.

for optimum loading of laboratory glassware on upper levels.

for optimum loading of up to 121 pipettes.

with 20 unoccupied injector slots.

with plastic support for securing load items with clamp, Ø 6, length 225 mm.

for the optimum loading of wide-necked Erlenmeyer flasks & measuring cylinders.

equipped with 6 APLW 067 injector nozzles and 6 APLW 066 injector nozzles.

for dividing the footprint in the APLW 042.

for optimum loading of 2 pipette cartridges.

for APLW 040–042 inserts

equipped with 12 APLW 056 injector nozzles and 12 APLW 052 injector nozzles.

with 20 unoccupied injector slots for nozzles.