PG 8583 CD [WW ADP CM] - Laboratory dishwasher
 

PG 8583 CD [WW ADP CM]
Laboratory dishwasher
with pump for AD water, liquid dispensing, DryPlus & conductivity monitoring.

  • Perf./cycle, e.g. 128 laboratory flasks

    Further stacking options

    Alternatively, 98 pipettes can be reprocessed per cycle with further laboratory glassware.
  • Efficient use of resources - variable speed heater pump

    The heart of perfect results

    In the individual programmes the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
  • Safety - Wash pressure, spray arm and conductivity monitoring

    For a reliable result

    Outstanding preparation results are achieved because the jet pressure and spray arms are monitored continuously and a decline in jet pressure or load blockage is detected immediately In addition, any deviations from the prescribed conductivity of the water, particularly in the final rinse, are detected.
  • Efficient hot air drying - DryPlus

    Efficient drying

    Hot air drying DryPlus is the optimum solution for hollow instruments or narrow-lumened laboratory glassware. The upstream H14 HEPA filter ensures optimum particle separation from the drying air. The filter is easily accessible via a side unit.
  • Total security - link to process documentation possible

    End-to-end documentation

    The optional addition of a module for process documentation is provided via a communication slot. The Ethernet module is used for documentation via software. The RS 232 module must be used for documentation within a USB solution or via a printer.
PG8583 CD [WW ADP CM]

Optional Accessories - PG 8583 CD [WW ADP CM]

APS 101 Sego Segosoft Miele Edition (additional licences)
APS 101 SegoSegosoft Miele Edition (additional licences)

For connection with a second or additional appliance.

APS 200 Sego Segosoft Miele Edition USB solution
APS 200 SegoSegosoft Miele Edition USB solution

for seamless and legally watertight documentation via USB stick.

E 402 Insert
E 402Insert

for optimum loading of up to 44 watch glasses.

E 354 Clamps
E 354Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

A 845/2 Injector nozzle
A 845/2Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 10 items.

A 845/3 Injector nozzle
A 845/3Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 20 items. 

A 846 Injector nozzle
A 846Injector nozzle

with support, for cleaning laboratory flasks and round flasks.

A 847 Injector nozzle
A 847Injector nozzle

with support, for cleaning Erlenmeyer flasks.

A 848 Injector nozzle
A 848Injector nozzle

with support, for cleaning measuring cylinders.

A 860 Holder rack 
A 860Holder rack 

for injector modules A 300/2 and A 300/3

E 362 Blind stopper
E 362Blind stopper

For the sealing of fittings to load carriers.

A 861 Holder rack 
A 861Holder rack 

for injector modules A 301/4 and A 301/5

A 862 Holder rack 
A 862Holder rack 

for injector modules A 302/2 and A 302/3

ProCare Lab 11 MA Powder cleaning agent, mildly alkaline, 10 kg
ProCare Lab 11 MAPowder cleaning agent, mildly alkaline, 10 kg

For optimum reprocessing of laboratory utensils.

APH 591 Paper roll
APH 591Paper roll

for protocol printer APH 500 PRT100 and APH 510 PRT110.

SD-B Injector nozzle
SD-BInjector nozzle

for butyrometers.

APH 590 Ink cartridge
APH 590Ink cartridge

for PRT 100 report printer.

PG 8596 Dispensing cabinet
PG 8596Dispensing cabinet

For process chemicals and dispenser modules

APH 531 Adapter
APH 531Adapter

For connecting the Miele printer cable to the appliance.

MT Trolleys
MTTrolleys

for loading & unloading washer-&disinfectors.

APH 530 Connection cable
APH 530Connection cable

For interruption-free connection to the printer.

MC/2 Transfer trolley
MC/2Transfer trolley

height adjustable, for loading & unloading washer-&disinfectors.

APH 500 PRT 100 Report printer
APH 500 PRT 100Report printer

for printing process reports.

LP 2800 Demineralisation cartridge, empty
LP 2800Demineralisation cartridge, empty

For the manual filling of single use resins.

APH 409 Crossover network cable
APH 409Crossover network cable

for direct connection to PC, length 5 m (type 9).

ID 90 Injector nozzle
ID 90Injector nozzle

with plastic supports, Ø 3, length 90 mm.

APH 408 Crossover network cable
APH 408Crossover network cable

for direct connection to PC, length 3 m (type 8).

ID 240 Injector nozzle
ID 240Injector nozzle

with plastic supports, Ø 6, length 240 mm.

ID 220 Injector nozzle
ID 220Injector nozzle

with plastic supports, Ø 6, length 220 mm.

APH 407 Network cable
APH 407Network cable

for connection to the network, length 5 m (type 7).

ID 200 Injector nozzle
ID 200Injector nozzle

with plastic supports, Ø 6, length 200 mm.

ID 180 Injector nozzle
ID 180Injector nozzle

with plastic supports, Ø 4, length 180 mm.

APH 406 Network cable
APH 406Network cable

for connection to the network, length 3 m (type 6).

ID 160 Injector nozzle
ID 160Injector nozzle

with plastic supports, Ø 4, length 160 mm.

ID 140 Injector nozzle
ID 140Injector nozzle

with plastic supports, Ø 4, length 140 mm.

APH 305 Extension cable
APH 305Extension cable

10 m, for the extension of connection cable type 1 and 2.

ProCare Universal 61 Dishwasher salt, 3 x 2 kg
ProCare Universal 61Dishwasher salt, 3 x 2 kg

For optimum regeneration of the integrated softener.

ID 110 Injector nozzle
ID 110Injector nozzle

with plastic supports, Ø 3, length 110 mm.

APH 304 Extension cable
APH 304Extension cable

5 m, for the extension of connection cable type 1 and 2.

APH 190 Wall bracket
APH 190Wall bracket

for Segosoft modules.

APH 303 Extension cable
APH 303Extension cable

3 m, for the extension of connection cable type 1 and 2.

APH 301 Connection cable type 1
APH 301Connection cable type 1

for connection of a machine with serial interface to a PC.

APH 302 Connection cable type 2
APH 302Connection cable type 2

for connection of a machine with serial interface to a PC.

E 403 Insert
E 403Insert

for optimum loading of up to 105 watch glasses.

E 470 Injector nozzle
E 470Injector nozzle

for use in the mobile injector unit, Ø 2.5 x 90 mm.

ProCare Lab 30 C - 5 l Neutralising agent, acidic, 5 l
ProCare Lab 30 C - 5 lNeutralising agent, acidic, 5 l

For optimum neutralisation with citric acid based neutralising agent.

ProCare Lab 30 P - 5 l Neutralising agent, acidic, 5 l
ProCare Lab 30 P - 5 lNeutralising agent, acidic, 5 l

For optimum neutralisation with phosphoric acid based neutralising agent.

ProCare Lab 10 MA - 5 l Liquid detergent, mildly alkaline, 5 l
ProCare Lab 10 MA - 5 lLiquid detergent, mildly alkaline, 5 l

for optimum reprocessing of laboratory glassware and utensils.

AK 12 Insert
AK 12Insert

for holding different utensils.

AK 12/1 Insert
AK 12/1Insert

for loading different utensils.

SK Quick connection
SKQuick connection

For the simple and convenient changing of demineralisation cartridges.

ProCare Lab 10 MA - 10 l Liquid detergent, mildly alkaline, 10 l
ProCare Lab 10 MA - 10 lLiquid detergent, mildly alkaline, 10 l

for optimum reprocessing of laboratory glassware and utensils.

ProCare Lab 10 AP - 5 l Liquid detergent, alkaline, 5 l
ProCare Lab 10 AP - 5 lLiquid detergent, alkaline, 5 l

For optimum reprocessing of laboratory utensils.

E 353 Clamps
E 353Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

A 843 Injector nozzle
A 843Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 1 item

E 106/2 Insert
E 106/2Insert

For the optimum loading of wide neck flasks, measuring cylinders, etc.

E 103/1 Insert
E 103/1Insert

For the optimum loading of test tubes up to 12 x 75 mm.

A 843/1 Injector nozzle
A 843/1Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 5 items

A 306/1 Module
A 306/1Module

for the optimum loading of large-volume laboratory glassware. 

DataDiaryID NFC chipcards
DataDiaryIDNFC chipcards

for easy user identification in the DataDiary app.

E 109 Insert
E 109Insert

for the optimum loading of beakers up to 250 ml.

XKM 3000 L Med Communication module
XKM 3000 L MedCommunication module

with Ethernet connection for integration in a network.

A 843/2 Injector nozzle
A 843/2Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 10 items

A 841/1 Injector nozzle
A 841/1Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 5 items 

A 312 Module
A 312Module

For reprocessing viscometers.

A 151 Lower basket
A 151Lower basket

For holding standard DIN mesh trays as well as various inserts.

A 150 Lower basket
A 150Lower basket

For the optimum loading of injector modules or inserts.

A 843/3 Injector nozzle
A 843/3Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 185 mm, 20 items

A 313 Module
A 313Module

For reprocessing large-volume laboratory glassware.

E 110 Insert
E 110Insert

for the optimum loading of beakers from 250 to 600 ml.

A 844 Injector nozzle
A 844Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 1 item.

A 14/1 Lid
A 14/1Lid

for securing delicate load items.

E 351 Injector nozzle
E 351Injector nozzle

For the optimum cleaning of the wash items. Size 4 x 160 mm.

E 149 Insert
E 149Insert

for optimum loading of 80 test tubes, 16 x 105 mm.

A 844/1 Injector nozzle
A 844/1Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 5 items.

A 841 Injector nozzle
A 841Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 1 item

A 5 Lid
A 5Lid

For optimum securing of delicate items.

A 840/3 Injector nozzle
A 840/3Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 20 items.

UfZ Conversion kit for two cartridges
UfZConversion kit for two cartridges

For the quick change to a full/partial demineralisation cartridge.

DataDiary App-based cycle documentation
DataDiaryApp-based cycle documentation

for easy, wireless reporting.

A 844/2 Injector nozzle
A 844/2Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 10 items. 

E 111 Insert
E 111Insert

For the optimum loading of beakers from 600 to 1,000 ml.

E 104/1 Insert
E 104/1Insert

For the optimum loading of test tubes up to 12 x 105 mm.

A 301/5 Module
A 301/5Module

for optimum loading of laboratory glassware – can be equipped with 18 nozzles.

A 302/2 Module
A 302/2Module

for optimum loading of laboratory glassware – can be equipped with 32 nozzles.

A 301/4 Module
A 301/4Module

for optimum loading of laboratory glassware – can be equipped with 18 nozzles. 

A 842/1 Injector nozzle
A 842/1Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 5 items 

E 319/3 Surface filter
E 319/3Surface filter

For optimum protection against contamination from labels or glass splinters.

A 842 Injector nozzle
A 842Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 1 item 

UBS 3 Conversion kit
UBS 3Conversion kit

For use with selected series G 78 upper baskets in PG 85 machines.

E 106 Insert
E 106Insert

For the optimum loading of wide neck flasks, measuring cylinders, etc.

UG 30-90/70-85 Closed plinth
UG 30-90/70-85Closed plinth

to raise the machine, 70 cm deep, 90 cm wide.

A 302/3 Module
A 302/3Module

for optimum loading of laboratory glassware – can be equipped with 32 nozzles.

A 300/3 Module
A 300/3Module

for optimum loading of laboratory glassware – can be equipped with 8 nozzles. 

A 300/2 Module
A 300/2Module

for optimum loading of laboratory glassware – can be equipped with 8 nozzles.

E 105/1 Insert
E 105/1Insert

For the optimum loading of test tubes up to 12 x 165 mm.

A 303 Module
A 303Module

for the optimum loading of up to 98 pipettes.

A 3 Cover net
A 3Cover net

As cover for wash items in inserts.

A 202 Mobile unit
A 202Mobile unit

for the optimum loading of 4 DIN mesh trays.

E 316 Plastic barrel
E 316Plastic barrel

For refilling single use resins

A 841/3 Injector nozzle
A 841/3Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 20 items

UBS 1 Conversion kit
UBS 1Conversion kit

For use with selected series G 78 load carriers in PG 85 machines.

A 842/2 Injector nozzle
A 842/2Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 10 items

E 319/4 Surface filter
E 319/4Surface filter

For optimum protection against contamination from labels or glass splinters.

A 200 Mobile unit
A 200Mobile unit

for the optimum loading of 38 pipettes.

A 304 Module
A 304Module

For the optimum loading of up to 98 vials.

A 842/3 Injector nozzle
A 842/3Injector nozzle

with plastic supports, nozzle diameter 4 mm, length 90 mm, 20 items

E 106/1 Insert
E 106/1Insert

For the optimum loading of wide neck flasks, measuring cylinders, etc.

E 336 Irrigation sleeves
E 336Irrigation sleeves

For the optimum loading of pipettes/MIS instruments in injector units.

A 2 Cover net
A 2Cover net

For fixing delicate wash items.

E 315 Full demineralisation single use resin
E 315Full demineralisation single use resin

For the regeneration of full demineralisation cartridges

CM/1 ConductivityMeter
CM/1ConductivityMeter

For measuring the conductivity level and the display for changing the cartridge.

A 841/2 Injector nozzle
A 841/2Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 210 mm, 10 items 

A 838 Key set
A 838Key set

For adjusting basket heights and installing/removing injector nozzles.

A 12/1 Insert
A 12/1Insert

For the gentle cleaning of delicate items by interrupting the spray jet.

XKM RS 232 10 Med Communication module
XKM RS 232 10 MedCommunication module

with serial interface (RS232) for connection to a printer.

A 103 Upper basket
A 103Upper basket

For the optimum loading of inserts.

A 11/2 Insert
A 11/2Insert

For the gentle cleaning of delicate load items by interrupting the water jet.

A 12/2 Insert
A 12/2Insert

For the gentle cleaning of delicate load items by interrupting the water jet.

E 139/1 Insert
E 139/1Insert

For the optimum loading of test tubes up to 12 x 200 mm.

A 840/1 Injector nozzle
A 840/1Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 5 items.

A 100 Upper basket
A 100Upper basket

For the optimum loading of injector modules or inserts.

VE P 2800 Full demineralisation cartridge
VE P 2800Full demineralisation cartridge

For optimum water preparation.

E 142 Insert
E 142Insert

For holding different instruments.

A 802 Jets
A 802Jets

for the optimum cleaning of the dispenser compartment.

A 840/2 Injector nozzle
A 840/2Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 10 items.

E 134 Insert
E 134Insert

for optimum loading of 210 slides.

XKM RS 232 10 Med Communication module
XKM RS 232 10 MedCommunication module

with serial interface (RS232) for connection to a printer.

E 137 Insert
E 137Insert

for optimum loading of 56 half petri dishes.

A 844/3 Injector nozzle
A 844/3Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 20 items.

A 102 Upper basket
A 102Upper basket

Height adjustable, for the optimum loading of inserts.

E 136 Insert
E 136Insert

for optimum loading of 56 half petri dishes.

A 11/1 Insert
A 11/1Insert

For the gentle cleaning of delicate items by interrupting the spray jet.

A 14 Lid
A 14Lid

For fixing delicate wash items.

DE-CS7-85 Appliance lid
DE-CS7-85Appliance lid

for the top cover on the machine, 70 cm deep, 90 cm wide.

A 840 Injector nozzle
A 840Injector nozzle

with plastic supports, nozzle diameter 6 mm, length 130 mm, 1 item. 

E 118 Insert
E 118Insert

for the optimum loading of half petri dishes.

A 101 Upper basket
A 101Upper basket

Height adjustable, for the optimum loading of inserts.

A 845/1 Injector nozzle
A 845/1Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 5 items.

DTD 2 Drip tray 
DTD 2Drip tray 

For the secure placement of media canisters. 

VE P 2000 Full demineralisation cartridge
VE P 2000Full demineralisation cartridge

For optimum water preparation.

E 144 Insert
E 144Insert

For the optimum loading of up to 18 beakers.

A 13 Lid
A 13Lid

For fixing delicate wash items.

A 845 Injector nozzle
A 845Injector nozzle

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 1 item.

E 352 Injector nozzle
E 352Injector nozzle

For the optimum cleaning of the wash items.

Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs