PLW 6111 [DP WS SC CL H14 CS SV USB]
Laboratory washer with 3 wash levels in SlimLine design
with steam condenser, water softener, conductivity sensor and chamber lighting.
- Cap./cycle 126 narrow-necked glassware/121pipettes – 210 l usable capacityFurther loading options
Alternatively, 468 test tubes or 84 laboratory flasks can be reprocessed per cycle. - Ergonomic loading and unloading – telescopic runners
- Flexible – 4 different level positionsSmartLoad
Wash and dry with hot air on three separate wash levels, can be used flexibly in three positions. - Have everything in view thanks to the full-glass doorFull-glass door
In combination with the chamber lighting, the glass door allows a visual check of the current process. - High capacity – reprocessing of flasks up to 50 lLarge wash chamber
The spacious chamber provides room for large containers (up to 50 litres and 630 mm in height).
Product benefits

SlimLine design
Space-saving
The slim design, just 650 mm wide, fits in the smallest of spaces while ensuring a high capacity.

Clear text display
Text display
Everything at a glance: The display shows everything as clear text in the country-specific language.
Product details
PLW 6111 [DP WS SC CL H14 CS SV USB]
EAN 8051160652808 / Article number 62611137GB / Material number 10958860
EAN 8051160652808 / Article number 62611137GB / Material number 10958860
Construction type | Freestanding, 1 glazed hinged door |
---|---|
Heating type | Electricity |
Front/back | Stainless Steel |
Side panels | Stainless steel |
Slimline design | |
Number of wash levels | 3 |
Loading and unloading with telescopic runners | |
Electrical door lock | |
Buzzer, acoustic signal at end of programme | |
Service-friendly design |
Narrow-necked glassware per cycle [number] | 126 |
---|---|
Test tubes per cycle [number] | 468 |
Laboratory flasks per cycle [number] | 84 |
Pipettes per cycle [number] | 121 |
Circulation pump, Qmax in l/min. | 700 |
---|---|
Wash cabinet usable capacity in l | 210 |
Control system | MP.CON 3 |
---|---|
Programme selection | Touch on Glass Touch on Glass The high-quality, flush-fit glass surface is particularly easy to clean and thanks to innovative "Touch on Glass" controls it enables rapid access to all programmes and settings. |
Programmability | Freely programmable |
Programmes [number] | 18 |
Free programme positions [number] | 20 |
Programme recontinuation in event of power outage | Programme failure protection Time-saving and safe: The programme failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message. |
Time left display | |
Programme sequence indicator | |
Selectable display languages |
Electrical connection | 3N AC 380-400V 50HZ |
---|---|
Heater rating in kW | 7.50 |
Total connected load in kW | 8.25 |
Fuse rating in A | 16 |
Length of mains connection cable in m | 2.00 |
Cold water [number] | 1 |
---|---|
Hot water [number] Efficient hot water connection Connection to the warm water supply saves a lot of time and energy. | 1 |
DI water [number] DI water connection Thanks to the connection for fully demineralised water (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Carrying out the final rinse with DI water also protects valuable wash items from deposits and corrosion. | 1 |
Required flow pressure in kPa | 100-800 |
Built-in water softener | |
Maximum water hardness (cold water/hot water) in mmol/l | 0.700 |
Drain pump [DN] | 22 |
Heating mode drying unit | Electricity Drying unit Reliable reprocessing results achieved more quickly with hot air drying. |
---|---|
Air throughput in m³/h | 150 |
Temperature settings in 1 °C steps | 0-160 |
Time setting in 1 minute steps | 0-120 |
HEPA filter class | H14 HEPA filters Protection against contamination thanks to particle-free drying air. |
Filtration efficiency HEPA filter (DIN EN 1822) in % | 99,995 |
HEPA filter service life in h | 1.000 |
Electric heater rating in kW | 4,0 |
External dimensions, net height in mm | 1,870 |
---|---|
External dimensions, net width in mm | 650 |
External dimensions, net depth in mm | 687 |
External dimensions, gross height in mm Note Including packaging | 2,110 |
External dimensions, gross width in mm Note Including packaging | 945 |
External dimensions, gross depth in mm Note Including packaging | 840 |
Wash cabinet, width in mm | 540 |
Wash cabinet, height in mm | 665 |
Wash cabinet, depth in mm | 585 |
In-feed height above floor in mm | 850 |
Net weight in kg | 251 |
Gross weight in kg Note Including packaging | 260 |
Maximum floor loading in N Maximum floor bearing capacity Maximum floor bearing capacity states the maximum weight (N) that can be placed on the supporting surface on which the machine is installed. This maximum load bearing capacity is the result of adding up the weight of the machine, the load and the water in it, as well as the dynamic forces that occur during operation. | 4000 |
Sound pressure LpA in cleaning and drying according to DIN EN ISO 11201 Emissions - sound pressure at workplace The emission sound pressure level depends on the programme and is a value given to the noise created by the machine. Miele Professional appliances have very low noise levels. | <70 dB(A) re 20 µPa |
---|---|
Heat dissipation into the room in MJ/h Heat output into the room During operation warm air is vented into the surrounding room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature. | 1,26 |
Thermal disinfection | |
---|---|
Laboratory glassware | |
Plastics |
2 integrated hose dispenser pumps for liquid media | |
---|---|
Steam condenser | |
Volumetric dispensing control | |
Conductivity monitoring | |
Interface for cycle documentation | |
Multi-component filter system | |
Load carriers – direct connection | |
Integrated hot-air drying | |
Setting options for chemical agents (3 x 5 l) | |
Wash cabinet made from high-quality stainless steel (1.4404/316L) | |
Plinth | |
Chamber lighting |
CE | |
---|---|
EN 61010-2-040 | |
RoHS guideline 2011/65/EU | |
Machinery Directive 2006/42/EC |
Downloads
You can download these CAD data for free. You will receive a download link via e-mail.
ZIP archive in 3D format FBX
ZIP archive in 3D format IFC
ZIP archive in 3D format RFA
ZIP archive in 3D format RVT
ZIP archive in 3D format DWG