- The programme does not start
-
Check that the mains plug is correctly inserted and that the fuse has not tripped.
Check that the door is closed properly and that the correct programme has been selected and started. A number of Miele Tumble Dryers have a system lock to prevent unauthorised use in shared laundry rooms.
Check that this lock is deactivated. Information on activation and deactivation is given in the operating instructions.
- 'Empty out container' indicator comes on
-
The condensed water container needs emptying. Switch off the tumble dryer, empty, then replace the container. Ensure that it clicks firmly into position.
If a condensate drain hose has been fitted, check this for kinks or blockages.
- The dryer runs for an exceptionally long time and/or the 'Clean airways' indicator comes on
-
Clean the fluff filters in the door frame. The heat exchanger should also be cleaned. The cleaning process is described in the operating instructions.
- The drum door opens during the drying cycle
-
Check that airways are not blocked and clean the affected part according to the operating instructions.
- The following LEDs flash: Machine iron, Hand iron, Normal
-
Switch the dryer off and then back on again. If the fault message reappears, please contact our Customer Service.
- Horizontal bars move across the display
-
This does not indicate a fault but residual moisture sensing at the beginning of a programme.